background image

5

English

Do not expose yourself directly 

to cold air for a long period to 

avoid excess cooling.
Do not sit or step on the 

unit, you may fall down 

accidentally.

Remote control

Do not allow infants and small 

children to play with the remote 

control to prevent them from 

accidentally swallowing the 

batteries.

Power supply

Do not use a 

modi

fi

 ed cord, joint 

cord, extension cord 

or unspeci

fi

 ed cord to 

prevent overheating 

and 

fi

 re.

  

To prevent overheating, 

fi

 re or 

electric shock:

• Do not share the same power 

outlet with other equipment.

• Do not operate with wet hands.

• Do not over bend the power 

supply cord.

• Do not operate or stop the unit 

by inserting or pulling out the 

power plug.

If the supply cord is damaged, 

it must be replaced by the 

manufacturer, service agent or 

similarly quali

fi

 ed persons in 

order to avoid a hazard.
It is strongly recommended to 

be installed with Earth Leakage 

Circuit Breaker (ELCB) or 

Residual Current Device (RCD) 

to prevent electric shock or 

fi

 re.

To prevent overheating, 

fi

 re or 

electric shock:

• Insert the power plug properly.

• Dust on the power plug should 

be periodically wiped with a dry 

cloth.

Stop using the product if any 

abnormality/failure occurs and 

disconnect the power plug or 

turn off the power switch and 

breaker.

(Risk of smoke/

fi

 re/electric 

shock)

Examples of abnormality/failure

• The ELCB trips frequently.

• Burning smell is observed.

• Abnormal noise or vibration of 

the unit is observed.

• Water leaks from the indoor 

unit.

• Power cord or plug becomes 

abnormally hot.

• Fan speed cannot be controlled.

• The unit stops running 

immediately even if it is 

switched on for operation.

• The fan does not stop even if 

the operation is stopped.

Contact your local dealer 

immediately for maintenance/

repair.

This equipment must be earthed 

to prevent electrical shock or 

fi

 re.

Prevent electric shock by 

switching off the power supply 

and unplug:

 

-Before cleaning or servicing,

 

-When extended non-use, or

 

-During abnormally strong 

lightning activity.

Safety precautions

Содержание CS-LZ25TKE
















Отзывы: