Panasonic CS-E9DKDW Скачать руководство пользователя страница 47

Страница: 47 / 98

Adjust the vertical
or horizontal airﬂ ow
direction louver.

■

Operations Details

• To provide fresh air effect by

producing negative ions.

• Ion operation could be activated

independently.

• Press

button to stop the

operation.

• To achieve setting temperature

quickly.

ION

POWERFUL

Enables
powerful
operation.

Enables ion
operation.

ION

Powerful,

Powerful, Quiet,

Quiet, Ion, Fan Speed,

Ion, Fan Speed,

Air Swing

POWERFUL

Select fan speed.

FAN SPEE

FAN SPEED

AIR SWING

• To provide a quiet environment.

QUIET

●

Powerful and Quiet operations could not be activated at the

same time.

●

Powerful, Quiet and Ion operations could be cancelled by

pressing the respective button again.

Troubleshooting

●

ION indicator on the indoor unit is blinking.

➤

Press ION button twice. If the indicator is still blinking, please consult

the dealer.

●

Indoor fan stops occasionally during Automatic Fan

Speed setting.

●

Indoor fan stops occasionally during heating operation.

➤

This is an advanced feature that helps to remove smell from the

surrounding area during operation.

➤

To avoids unintended cooling effect.

HOW TO OPERATE

Hints

●

If you wish to have the cool air blowing directly on you, set the airﬂ ow direction downward but not for an excessive length of time,

as it may harm your health.

●

Approximately 10% of electricity can be saved if you set the temperature 1°C higher in cooling operation or 2°C lower in heating

operation than the desired temperature.

• To provide you with the various fan

speed selections.

• There are 5 levels of fan speed in

addition to automatic fan speed.

• Automatic fan speed:

The speed of the indoor fan is

automatically adjusted according to
the operation.

FAN SPEED

• To ventilate air in the room.

• There are 5 selections in addition to

automatic vertical air ﬂ ow direction.

• If automatic vertical airﬂ ow direction

has been set, the louver swings up
and down automatically.

• To ventilate air in the room.

• There are 5 selections in addition

to automatic horizontal air ﬂ ow
direction.

• If automatic horizontal airﬂ ow

direction has been set, the louver
swings left and right automatically.

• Please do not adjust the vertical and

horizontal airﬂ ow direction louver
manually.

AIR SWING

Enables quiet
operation.

QUIET

CS-E9DKDW CU-E9DKD / CS-E12DKDW CU-E12DKD

Содержание CS-E9DKDW



































































































Результаты поиска

Содержание CS-E9DKDW

Отзывы:

Бренды по названию

Популярные бренды

Panasonic CS-E9DKDW, Руководство по обслуживанию

Результаты поиска

Содержание CS-E9DKDW

Отзывы:

Бренды по названию

Популярные бренды