Panasonic CS-E18NKUA, Руководство по обслуживанию

Страница: 33 / 82

33
š
Manual vertical airflow direction can be set using remote control; the angles of the vane are as stated above and
the positions of the vane are as Figure 2 below. When the air conditioner is stopped using remote control, the
vane will shift to close position.
12.4.2 Horizontal Airflow
š
Automatic horizontal airflow direction can be set using remote control; the vane swings left and right within the
angles as stated below. For heating mode operation, the angle of the vane depends on the indoor heat
exchanger temperature as Figure 1 below.
š
Manual vertical airflow direction can be set using remote control; the angles of the vane are as stated below and
the positions of the vane are as figure below:
12.5 Quiet Operation (Cooling Mode/Cooling Area of Dry Mode)
š
Purpose
o
To provide quiet cooling operation compare to normal operation.
š
Control condition
o
Quiet operation start condition
ƒ When “Quiet” button at remote control is pressed.
Quiet LED illuminates.
o
Quiet operation stop condition
ƒ When one of the following conditions is satisfied, quiet operation stops:
š
Powerful button is pressed.
š
Stop by OFF/ON button.
š
OFF Timer activates.
š
Quiet button is pressed again.
ƒ When quiet operation is stopped, operation is shifted to normal operation with previous setting.
ƒ When fan speed is changed, quiet operation is shifted to quiet operation of the new fan speed.
ƒ When operation mode is changed, quiet operation is shifted to quiet operation of the new mode.