6
REMOTE CONTROL
3
TO SELECT OPERATION MODE
HEAT mode - To enjoy warm air
• Unit takes a while to warm up. The power indicator blinks
during this operation.
• Unit may stops warm air supply for deice. The deice
indicator ON during this operation.
COOL mode - To enjoy cool air
• Use curtains to screen off sunlight and outdoor heat to
reduce power consumption during cool mode.
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle cooling
operation.
FAN mode - To circulate air in the room
AUTO mode - For your convenience
• During operation mode selection the power indicator blinks.
• Unit selects operation mode every 10 minutes according
to temperature setting and room temperature.
4
TO SELECT FAN SPEED (5 OPTIONS)
FAN SPEED
• For AUTO, the indoor fan speed is automatically adjusted
according to the operation mode.
5
TO ADJUST AIRFLOW DIRECTION (5 OPTIONS)
AIR SWING
• Keeps the room ventilated.
• In COOL/DRY mode, if AUTO is set, the louver swing
left/right and up/down automatically.
• In HEAT mode, if AUTO is set, the horizontal louver
fi
x at
predetermined position. The vertical louver swing left/right
after the temperature rises.
6
TO PURIFY THE AIR
NANOE-G
• Removes/deactivates harmful micro-organisms such as
viruses, bacteria, etc.
• Can be activated even when the unit is turned off. In this
condition, fan speed and air swing cannot be adjusted.
• nanoe-G starts automatically with the unit switched on
with
OFF/ON
.
MODE
POWERFUL/
QUIET
TEMP
OFF/ON
TIMER
SET
CANCEL
ON
OFF
1
2
3
AIR SWI
NG
FAN SPEED
+8/10°C
HEAT
SET CHECK
CLOCK
RESET
AC
RC
FAN
FAN
SPEED
AIR
SWING
AUTO
+8/10°C
HEAT
HEAT
COOL
DRY
ECONAVI
NANOE-G
6
2
5
Remote
Control display
4
3
9
8
7
10
11
12
13
1
Maximum distance: 8m
(Green/
Blue)
(Orange)
(Green)
(Green)
(Blue)
(Orange)
(Orange)
TIMER
+8/10°C HEAT
NANOE-G
POWERFUL
QUIET
POWER/
DEICE
Indicator
Sunlight Sensor and Remote
Control Receiver
Press the remote control’s button
1
TO TURN ON OR OFF THE UNIT
POWER/
DEICE
• Please be aware of the OFF indication on the remote control
display to prevent the unit from starting/stopping improperly.
2
TO SET TEMPERATURE
• Selection range: 16°C ~ 30°C (Not applicable for FAN
mode).
• Operating the unit within the recommended temperature
could induce energy saving.
HEAT mode : 20°C ~ 24°C.
COOL mode : 26°C ~ 28°C.
DRY mode : 1°C ~ 2°C lower than room temperature.
Jälleenmyyjäsi pääkaupunkiseudulla: Jäähdytinpalvelu RefGroup Oy, Kelatie 9 C, 01450 Vantaa, 050 - 433 2222
www.ILMALÄMPÖPUMPUT.com