background image

6

Remove

Remove

   CARE & CLEANING

  CARE & CLEANING

WASHING  INSTRUCTIONS

WASHING  INSTRUCTIONS

•  Do not use benzene, thinner or scouring powder.
•  Use only soap (  pH7) or neutral household detergent.
•  Do not use water hotter than 40°C.

  HINTS

 HINTS

• Clean the 

fi

 lter regularly for best performance and to 

reduce power consumption.

•  Please consult your nearest dealer for seasonal 

inspection.

CAUTION

• Clean the 

fi

 lters regularly.

• Wash/rinse the 

fi

 lters gently with water 

to avoid damage to the 

fi

 lter surface.

• Dry the 

fi

 lters thoroughly under 

the shade, away from 

fi

 re or direct 

sunlight.

•  Replace any damage 

fi

 lter. 

FRONT PANEL

FRONT PANEL

Raise and pull to remove. Wash 

gently and dry.

Clean with dry cotton bud.

•  Active e-ion generator 

cleaning is recommended 

every 6 months.

Wipe the unit gently with a soft, 

dry cloth.

INDOOR UNIT

INDOOR UNIT

ALUMINIUM FIN

ALUMINIUM FIN

e-ion FILTERS

e-ion FILTERS

ACTIVE e-ion GENERATOR

ACTIVE e-ion GENERATOR

ACTIVE e-ion POWER MODULE

ACTIVE e-ion POWER MODULE

FOR SEASONAL INSPECTION AFTER EXTENDED 

FOR SEASONAL INSPECTION AFTER EXTENDED 
NON-USE

NON-USE

•  Checking of remote control batteries.
•  No obstruction at air inlet and air outlet vents.
•  After 15 minutes of operation, it is normal to have the 

following temperature difference between air inlet and air 

outlet vents: 

Cooling: 

 8°C 

Heating: 

 14°C

NON SERVICEABLE CRITERIAS

NON SERVICEABLE CRITERIAS

TURN OFF POWER SUPPLY AND UNPLUG then CALL 

Authorized Distributor under the following conditions:
•  Abnormal noise during operation.
•  Water/foreign particles have entered the remote control.
•  Water leaks from Indoor unit.
•  Circuit breaker switches off frequently.
•  Power cord becomes unnaturally warm.
•  Switches or buttons are not functioning properly.

FOR EXTENDED NON-USE

FOR EXTENDED NON-USE

•  Activate heat mode for 2~3 hours to remove moisture left in 

the internal parts thoroughly.

•  Turn off the power supply and unplug.
•  Remove the remote control batteries.

 

Switch off the power supply and unplug before cleaning.

 

Do not touch the aluminium 

fi

 n, sharp parts may cause injury.

 

Содержание CS-A12HKD









Отзывы: