CQ-R221U
10
E
N
G
L
I
S
H
1
Power and Sound Controls
S•HDB
Power
Turn the key in the ignition until the accessory indicator lights.
Press [PWR] to switch on the power.
Notes:
●
When a cassette is inserted with all power connected, the unit
power will automatically turn on and tape loading begins and
plays.
●
When power is turned off while the time is displayed, the clock
mode remains on. When the [PWR] is pressed again, the
system is completely off.
Before you leave your car that has no ACC, be sure to switch
power off.
S•HDB
Volume
●
Press [VOL
j
j
] or [VOL
i
i
] to increase or decrease volume.
0 to 39
Volume Level
●
Press [VOL
j
j
] or [VOL
i
i
] for more than 0.5 second to
change numeric levels on the display rapidly.
S•HDB
Mute
●
Press [MUTE] to decrease Volume level.
●
“MUTE” blinks while this operation.
●
Press [MUTE] again to cancel.
Note: This unit is equipped with an anti-volume-blast circuit which serves as an automatic
volume level adjuster so that you will not be deafened with sudden loud volume.
This system operates as follows. When [PWR] is switched on, the volume level is low. After that,
the volume level gradually returns to the level as the same as the one before turning off.
Anti-volume-blast circuit is not effective when volume level is lower than position 20 at the display.
