8
CQ-RXBT490W/CR-LXBT490W
Preparation
First Time Power On
1
Set your car’s ignition
switch to the ACC or ON
position.
2
Press
[SOURCE] (
PWR
)
.
Battery Installation
Pull the insulation film
out from the backside of
the remote control unit
gently.
Insulation film
Note: Battery Information:
Battery Type: Lithium battery (CR2025) (Included in
the remote control unit)
Battery Life: Approximately 6 months under normal
use (at room temperature)
Clock Setting
1
Press
[MENU]
.
2
Press
[VOL] (PUSH SEL),
and turn
[VOL]
clockwise or counterclockwise to select
“CLOCK SET”.
3
Press
[VOL] (PUSH SEL),
and turn
[VOL]
clockwise (
q
) or counterclockwise (
w
) to
adjust.
Hour blinks.
4
Adjust the hour.
Hour entered
q
: sets the hour ahead.
w
: sets the hour back.
5
Press
[VOL] (PUSH SEL)
.
Minute blinks.
6
Adjust the minute.
Minute entered
q
: sets the minute ahead.
w
: sets the minute back.
7
Press
[VOL] (PUSH SEL)
.
Completed
Notes:
¡
“CLK ADJUST” is displayed when the clock is not
adjusted.
¡
When you want to readjust the clock, repeat steps 1
to 7.
Clock Display at Power Off
Press
[DISP]
to change the display.
Display off
cd
Clock display
(Default)
Clock Display Setting
1
Press
[MENU]
.
2
Press
[VOL] (PUSH SEL)
, select “CLOCK
SEL”.
3
Press
[VOL] (PUSH SEL),
and turn
[VOL]
clockwise or counterclockwise to select.
the 24-hour system
used (default)
cd
the 12-hour system
used
Notes:
¡
The clock display setting (12-hour/24-hour) is ac-
tivated once the rotary selection is made, the clock
display is corresponded to your setting after exiting
the clock display setting mode.
¡
Selection of the 12-hour system displays “AM” dur-
ing AM hours and “PM” during PM hours.
¡
To exit from the clock display setting, press [DISP].
