A
(Black)
(Dark blue)
Resistor(1k
Ω
)
A5
Fuse(
12
A)
B
BATTERY
ACC
Cautions:
¡
To prevent damage to the unit, be sure to follow the connection diagram below.
¡
Strip about 5 mm of the lead ends for connection (only non-ISO connector cords).
¡
Do not insert the power connector into the unit until the wiring is completed.
¡
Be sure to insulate any exposed wires to prevent short circuiting with the car chassis. Bundle all cables, and prevent
cable terminals from touching any metal parts.
¡
This unit can be connected to an optional CD changer (CX-DP9061/DP9060EN, CX-DP88N, CX-DP801/DP803EN or
CX-DP601EN) and optional extension cord.
¡
For connection to a CD changer, refer to the operating instructions of the CD changer (CX-DP9061/DP9060EN, CX-
DP88N, CX-DP801/803EN or CX-DP601EN).
A8 : Ground Lead
(Black)
To a clean, bare metallic part of the car chassis
A7 : Power Lead (ACC or IGN)
(Red)
To ACC power, +12VDC
A4 : Battery Lead
(Yellow)
To the car battery, cont12 V DC
A5 :
(Dark blue)
Motor Antenna Relay Control Lead
(To Motor Antenna) (Max. 500mA)
This lead is not intended for use with a switch actuated power antenna.
Amp·Relay Control Power Lead
This lead is for connection to a Panasonic power amplifier.
23
18
E
N
G
L
I
S
H
CQ-RD152/RD142/RD132N