12
Preparation
CQ-DX200W
Remote Control Preparation
Battery Replacement
q
Remove the battery holder
from the remote control unit
placed on a flat surface.
q
Stick your thumbnail into
the groove, and push the
holder in the direction of
the arrow.
w
Pull it out in the direction
of the arrow using a
tough pointed object.
w
Put a battery in the case
with (+) side facing up.
e
Put the case back.
Tough pointed object
Warning
Keep batteries and insulation film out of reach of
infants. If an infant ingests a battery, please seek
immediate medical attention.
Cautions
¡
Remove and dispose of an old battery immediately.
¡
Do not disassemble, heat or short a battery. Do not
throw a battery into a fire or water.
¡
Follow local regulations when disposing of a battery.
¡
Improper use of a battery may cause overheating, an
explosion or ignition, resulting in injury or a fire.
Note:
Battery Information:
Battery Type: Panasonic lithium battery (CR2025)
(Included in the remote control)
Battery Life: Approximately 6 months under normal use
(at room temperature)
q
w
w
e
Back side
Preparation Before Initial Use
Pull the insulation film out
from the backside of
remote control gently.
Insulation film
