Panasonic CQ-DP153W, Руководство по эксплуатации

Страница: 5 / 25

CQ-DP153W
9
CQ-DP153W
8
POWER
REP
D•M
VO
LU
M
E
CLOCK
CQ-DP153W
DI
SP
TRACK
TUNE
LOUD MUTE
7 8 9 10 11 12 SCAN
1 2 3 4 6
APM
BA
N
D
SR
C
5
PUS
H SEL•MONO/LO
C
D
IS
P
1 2 3 4
BA
N
D
6 5
E
N
G
L
I
S
H
3
E
N
G
L
I
S
H
4
POWER
REP
D•M
VO
LU
M
E
CLOCK
CQ-DP153W
DI
SP
TRACK
TUNE
LOUD MUTE
7 8 9 10 11 12 SCAN
1 2 3 4 6
APM
BA
ND
SRC
5
PUS
H SEL•MONO/LO
C
TUNE
D•M
TRACK
BA
N
D
SR
C
Radio
Radio CD player
(When a CD is inserted.)
Manual Tuning
[
l
TUNE]: Higher frequency
[ k TUNE]: Lower frequency
Seek Tuning
Press and hold ...
[
l TUNE]: Higher frequency
[
k
TUNE]: Lower frequency
Tuning will automatically stop when the signals of the next broadcast station are received.
Radio Mode
Press [SRC] (source) to change to the radio mode.
Direct Memory
Your favorite FM/AM radio station can be memorized in the D·M button and you can call back radio stations just by
pressing the button whatever the current sound source is, even if the power is off.
Default : FM 87.5 MHz
Band
Press [BAND] to select a desired band. ( ➡ page 8)
Preset Station Setting
Up to 6 stations each can be saved in the FM1, FM2, FM3
and AM preset station memories.
Note: Existing saved stations are overwritten with new
stations after following this procedure.
Display Change
Press [DISP] (display) to switch to the clock display.
Frequency Clock display
Caution: To ensure safety, never attempt to preset sta-
tions while you are driving.
Manual Preset Memory
Use manual or seek tuning to find a station.
(
➡
page 8)
Press and hold one of the preset buttons
from [1] to [6] until the display blinks once.
Auto Preset Memory (APM)
Press and hold [BAND] (APM: auto preset memory) for more than 2 seconds.
• The 6 stations with good reception will be automatically sared in the memory under
preset buttons from [1] to [6].
• Once set, the preset stations are sequentially scanned for 5 seconds each.
Preset
Station
Calling
C
Press the correspon-
ding preset button
from [1] to [6] to tune
in a preset station.
Mono/Local Selection (MONO/LOC)
MONO: Noise is significantly decreased when weak signals are received from an FM
broadcast station.
LOCAL: Only strong signals of stations are searched for in seek tuning, while at the
LOCAL OFF setting, relatively weak signals are also searched for.
• Press and hold [SEL] (MONO/LOC) more than 1 seconds to show the status,continu-
ously hold to change the mode per 1 second. Then, release when at the desired point.
Band
Press [BAND] to change the band.
Press [D·M]. (Press again to cancel)
¡ The direct memoried station is received.
Recalling the Direct Memory
D-M
Select the station in Radio mode (
➡
above)
Memorize
Press and hold [D·M] until D·M indicator lights.
D-M
Pressing continuously, frequency display will blink once and
new station will be overwritten on existing saved station.
blinks once
lights
D-M
ST MONO LOCAL
FM Stereo indicator
q
w
blinks once
(default)
(default)
MONO OFF / LOCAL OFF
LOCAL OFF
MONO ON / LOCAL OFF
MONO ON / LOCAL ON
MONO OFF / LOCAL ON
LOCAL ON
1 second
1 second
1 second
1 second
1 second
Press and hold ...
MONO indicator
LOCAL indicator
Regular mode
1 second
Regular mode
1 second
AM broadcasts FM broadcasts