CQ-C8403N
Radio
English
19
Up to 6 stations can be preset in AM (LW/MW), FM1,
FM2, and FM3 respectively.
Preset stations can be simply called up by pressing
[
}
]
(
P·SET
) or
[
{
]
(
P·SET
).
Notes:
¡
Direct access can be executed with
[1]
to
[6]
buttons
on remote control.
¡
You can switch between 6 and 18 for FM presetting
stations. (ALL BAND/EACH BAND)
Auto Preset Memory (APM)
Stations with good receiving conditions automatically
preset.
1
Select a band.
2
Hold down
[BAND]
(
APM
)
for 2 sec. or
more.
The preset stations under best receiving conditions
are received for 5 sec. each after presetting the sta-
tions (SCAN). To stop scanning, press
[
}
]
or
[
{
]
.
Notes:
¡
New stations overwrite existing saved stations.
¡
Only RDS stations will be saved at default setting (AF ON).
To select non RDS stations too, set AF OFF. (
a
page 21)
Manual station preset
1
Tune in to a station.
2
Hold down
[
}
]
or
[
{
]
for 2 sec. or
more.
3
Select a preset number by pressing
[
}
]
or
[
{
]
.
Note:
If
[BAND]
is pressed while receiving an FM
station, FM broadcasting is changeable among FM 1
to FM 3.
4
Hold down
[BAND]
(
SET
) for 2 sec. or
more to determine the selection.
Notes:
¡
In step 2, a station can be registered by holding down
the numeric button
[1]
to
[6]
for 2 sec. or more.
¡
To stop presetting stations, press
[D]
(
DISP:
DIS-
PLAY
).
¡
The operation above allows users to replace the cur-
rent station with the station preset in the selected
number while selecting a preset station.
Station Preset
(APM: AUTO PRESET MEMORY P·SET: PRESET)
DISP
PTY
Radio Menu Display
Only LOCAL is available while receiving an AM station.
1
Press
[MENU]
to display the menu dis-
play.
For using the remote
control, hold down
[SEL](MENU)
for 2
sec. or more.
2
Press
[
}
]
or
[
{
]
to select a mode to be
adjusted.
3
Press
[BAND]
(
SET
)
to adjust.
4
Press
[MENU]
to confirm the adjust-
ment.
For using the remote control, hold down
[SEL]
(MENU)
for 2 sec. or more.
MONO (Monaural)
Noise reduction when the signal strength decreases
: Receiving in stereo (default)
: Receiving in mono and reducing the noise level
LOCAL
Setting when searching for a station
: Searching even for a relatively low-intensity
radio wave station (default)
: Searching only for a high-intensity radio wave
station
PRESET
Preset range for FM bands
: Setting of FM1-3 together (default)
: Individual setting for FM1-3 each
DISP
PTY
DISP
PTY
