Panasonic CQ-C8352N, Руководство по обслуживанию

Страница: 13 / 100

Pin
No.
Port Part Name &
Description
I/O (V)
46 NC FLASH writing
program starter I 3.5
47 MD0 Mode setting terminal I 3.5
48 MD1 Mode setting terminal I 3.5
49 MD2 Mode setting terminal I 0
50 S W U REQ SUB-u-com wake up
request INT 3.0
51 ROTARY.1 Rotary encoder signal
1(VOL UP) I 2.5
52 ROTARY.2 Rotary encoder signal
2 (VOL DOWN) I 2.5
53 KI1(SOURCE) Key return signal 1 INT
/I
0
54 REMO INT Remote control signal
interference INT 3.7
55 NC No Connection - -
56 NC No Connection - -
57 NC No Connection - -
58 FLASH CE FLASH chip enable O 3.4
59 LCD CS LCD driver chip select O 3.4
60 LER R - - -
61 NC No Connection - -
62 REMO 1 Remote control signal I 3.7
63 NC No Connection - -
64 VLCD CONT VLCD 16V control O 3.4
65 M W U REQ MAIN-u-com wake up
request O 0
66 LED ON P.LED control output O 3.4
67 NC No Connection - -
68 NC No Connection - -
69 FLASH OE/
LCD RD
FLASH output enable
and LCD driver lead
strobe O 3.4
70 LCD WR LCD driver light
strobe signal O 3.4
71 FLASH WE FLASH light enable
signal O 3.4
72 NC No Connection - -
73 LCD RESET LCD driver reset
control O 3.4
74 FLASH RY/BY FLASH ready/busy
input
I 3.4
75 /RST System reset signal
input I 3.5
76 NC No Connection - -
77 X1A(NC) No Connection - -
78 X0A Not used I 0
79 VSS Ground - 0
13