English
9
8
Preparation
w
e
q
q
Pull out the battery
case while pushing the
tab.
w
Put a battery in the
case with (+)-side fac-
ing up.
e
Put the case back.
Battery Notes
¡
Remove and dispose of an old battery immediately.
¡
Battery Information:
Battery Type: Panasonic lithium battery (CR2025)
(Included)
Battery Life: Approximately 6 months under normal
use (at room temperature)
¡
Do not disassemble or short the battery. Do not throw
a battery into a fire.
¡
Keep batteries away from children to avoid the risk of
accidents.
¡
Follow local regulations when disposing of batteries.
OFF
ACC
IGN
For a ACC-equipped car, select ON. (
a
page 31) The
following functions are available. (default: off)
¡
The power is turned on automatically when inserting
a disc or magazine.
¡
The clock can be displayed even if the power is off.
(
a
page 14)
¡
After the security function (
a
page 31) is set to ON,
the function works when turning the ignition key to
OFF.
Caution
: Improper use of batteries may cause
overheating, an explosion or ignition, resulting in
injury or a fire.
Caution:
Be sure to select OFF when your car has no
ACC position in the ignition switch. Failure
to do this could cause the battery to go
dead.
Notes:
¡
Adjust the clock when “NO CT” appears on the dis-
play.
¡
When a broadcast of FM Radio Data System is
received, the clock is put right automatically by the
Clock Time service. (
a
page 18)
1
Press
[MENU]
to display the menu dis-
play.
For using the remote control, hold down
[MENU]
for 2 sec. or more.
2
Press
[
]
]
or
[
[
]
to display the DIS-
PLAY menu.
3
Press
[
{
]
to select “CLOCK ADJ”.
4
Press
[BAND]
(
SET
) to confirm the dis-
play.
5
Adjust the setting value.
[
[
]
: Adjusting minutes
[
]
]
: Adjusting hours
[
}
]
: Forward
[
{
]
: Backward
6
Press
[BAND]
(
SET
).
7
Press
[MENU]
to confirm the adjust-
ment.
For using the remote control, hold down
[MENU]
for 2 sec. or more.
The demonstration message appears for first use.
1
Press
[SOURCE]
(
PWR
).
The demonstration screen appears.
2
Press
[DISP]
(Display).
The demonstration screen is cancelled, and no more
appears.
Note:
If you would like to turn on the power and make the
demonstration message appear, hold down
[SOURCE]
(
PWR
: Power)
for 4 sec. or more. (at ACC on)
You may need to set the following depending on the
devices to be connected.
Using Subwoofer
¡
Subwoofer level adjustment (
a
page 30)
¡
Subwoofer low pass filter (
a
page 30)
The following functions are activated when the Security
Function is ON. (
a
page 31)
¡
The security indicator lights up when removing the
face plate.
¡
The alarm sounds and the message appears on the
screen to warn you to remove the face plate at power
off.
Note:
After the ACC setting is set to on, these functions
work when turning the main power off. (
a
page 31)
Security Indicator
CQ-C8300N
BAND
Preparation
First T
ime Power On
(DEMONSTRATION)
Batter
y into Remote Control
ACC Setting
Security Function
Setting
Other Settings
Clock adjustment
BAND
