18
CQ-C7413U/C7113U
1
Press
[SRC]
(
PWR
) to select the Sirius
Satellite Radio mode.
2
Press
[BAND]
to select a band.
Notes:
¡
“– – – –” is displayed when there is no informa-
tion.
¡
“UPDATING” is displayed when channel informa-
tion is updated.
3
Select a channel.
Channel selection
[
]
]
(
TUNE
): Preceding channel
[
[
]
(
TUNE
): Next channel
Preset channel selection
[
{
]
(
P·SET
: Preset): Lower preset channel
[
}
]
(
P·SET
: Preset): Higher preset channel
Note:
Direct selection can be executed with
[1]
to
[6]
buttons on remote control.
Up to 6 channels can be preset in SR1 to SR3
respectively.
Preset channels can be simply called up by pressing
[
}
]
(
P·SET
) or
[
{
]
(
P·SET
).
Note:
Direct selection can be executed with
[1]
to
[6]
buttons on remote control.
1
Tune into a channel.
2
Hold down
[
}
]
or
[
{
]
for 2 sec. or
more.
3
Select a preset number by pressing
[
}
]
or
[
{
]
.
4
Preset the channel by holding down
[
}
]
or
[
{
]
for 2 sec. or more.
Preset number/channel number blinks once.
Notes:
¡
In step 2, a channel can be registered by holding
down the numeric button
[1]
to
[6]
on remote control
for 2 sec. or more.
¡
To stop presetting channels, press
[D]
(
DISP:
Display)
.
¡
The operation above allows users to replace the cur-
rent channel with the channel preset in the selected
number while selecting a preset channel.
Sirius Satellite Radio Tuner
Operation Flow
Selection by Categor
y
You can toggle the category on and off every time you
hold down
[BAND]
for 2 sec. or more. If the category is
set to on, the unit operates as follows for each button:
Channel selection
[
]
]
(
TUNE
): Preceding channel in current category
[
[
]
(
TUNE
): Next channel in current category
Category selection
[
{
]
(
P·SET
: Preset): Preceding category
[
}
]
(
P·SET
: Preset): Next category
lights when activated
Channel Preset
(P·SET: Preset)
