33
English
Customize the Display
, Display Setting
CQ-C8401W/C7401W
32
CQ-C8401W/C7401W
Display Setting
Adjustment to display on the DISPLAY menu
DISPLA
Y Menu Display
1
Press
[MENU]
to display the menu
display.
For using the remote
control, hold down
[SEL] (MENU)
for 2
sec. or more.
2
Press
[
]
]
or
[
[
]
to display the
DISPLAY menu.
3
Press
[
}
]
or
[
{
]
to select a function
to be adjusted.
4
Press
[BAND]
(
SET
) to confirm
the display.
5
Adjust the setting value.
6
Press
[BAND]
(
SET
) to confirm the
adjustment.
7
Press
[MENU]
.
For using the remote control, hold down
[SEL]
(MENU)
for 2 sec. or more.
CQ-C8401W
CQ-C8401W
GRAPHIC PATTERN
(Setting range: 6 types, default: ALL)
Switching by
[
]
]
or
[
[
]
ALL
:
Sequential display from pattern A to D.
Pattern A to D
S.A.:
19-band display (Spectrum analyzer)
STILL IMAGE
(Setting range: 11 types, default: ALL)
Switching by
[
]
]
or
[
[
]
ALL
:
Sequential display from pattern 1 to 10
No.1 to 10
CONTRAST
(Setting range: 1 to 5, default: Contrast 3)
[
[
]
:
Tilting up view angle
[
]
]
:
Tilting down view angle
CLOCK ADJ
Note:
Adjust the clock when “ADJUST” appears on the
display.
[
[
]
:
Adjusting minutes
[
]
]
:
Adjusting hours
[
}
]
:
Forward
[
{
]
:
Backward
Notes:
¡
The graphic pattern and still image are changeable.
(
a
page 33)
¡
If corrupted data is selected, “DISPLAY FILE INCOM-
PLETE” appears. (
a
page 34)
Customize the Display
You can edit the moving images and still images that are initially stored in the unit. You also can use the data that is downloaded from
the Panasonic Web site and the data that is stored with a digital camera or other devices and processed with exclusive software,
IMAGE STUDIO. See “Notes on Customize function” (
a
page 34) as well.
Note:
Visit Panasonic Web site (
http://panasonic.co.jp/pas/en/software/customize/index.html
) for details.
CUSTOMIZE Menu Display
Preparation:
Put the CD-R/RW that contains data to
be customized in hand.
1
If there is a disc inside, take out the
disc.
2
Press
[SRC:
SOURCE]
to select
the CD mode.
3
Hold down
[SEL]
for 4 sec. or more to
display the menu screen.
4
Load a CD-R/RW that contains data.
Note:
¡
It may take time for the unit to identify the CD-
R/RW.
¡
Discs recorded by the packet writing software are
not supported.
5
Select an item to be customized.
[
}
][
{
]
:
Select
[BAND]
(
SET
): Confirm
Note:
To exit the customize menu, hold down
[SEL]
4 sec. or more.
GRAPHIC PATTERN
Moving image (graphic pattern) data (
a
page 32)
STILL IMAGE
Still image data (
a
page 32)
OPENING MESSAGE
Moving image at power on (
a
page 12)
CLOSING MESSAGE
Moving image at power off (
a
page 12)
6
Select a file.
[
}
][
{
][
]
][
[
]
:Select
[BAND]
(
SET
): Confirm
Notes:
¡
Files are automatically identified by their exten-
sions, and target files are displayed.
¡
If
“BACK”
is selected, the screen of step 5
appears.
7
For a moving image file or still image
file, select where to save the file.
[
}
][
{
][
]
][
[
]
:Select
[BAND]
(
SET
): Confirm
Notes:
¡
New data overwrites existing data.
¡
If
“BACK”
is selected, the screen of step 6
appears.
8
Confirm the changed item.
[
]
][
[
]
:
Select
[BAND]
(
SET
): Confirm
Customization is performed. Do not turn off the
power in mid-operation. (It takes approx. 1 minutes
to complete this operation for a 168 kB moving
image.) After completion of this operation, the
screen of step 5 appears.
Note:
If
“NO”
is selected, the screen of step 5
appears.
9
Press
[OPEN]
to eject the disc.
10
Hold down
[SEL]
for 4 sec. or more.
The CD mode comes back.
SRC
SQ
SRC
