15
English
Audio Setting
Audio Setting
14
Main volume adjustment
(Setting range: 0 to 40, Default: 18)
q
: Up
w
: Down
Bass adjustment
(Setting rang: -12 dB to +12 dB, 2 dB Step, Default:
Bass 0)
q
: Up
w
: Down
Treble adjustment
(Setting range: -12 dB to +12 dB, 2 dB Step, Default:
Treble 0)
q
: Up
w
: Down
Balance adjustment
(Setting range: L15 to R15 and Centre, Default: Centre)
q
: Right enhanced
w
: Left enhanced
Fader adjustment
(Setting range: R15 to F15 and Centre, Default: Centre)
q
: Front enhanced
w
: Rear enhanced
Subwoofer level adjustment
(Setting range : MUTE, -6 dB to +6 dB, 2 dB Step,
Default: 0)
q
: Up
w
: Down
Subwoofer Low Pass Filter
(Setting range: 80 Hz, 120 Hz, 160 Hz, Default: 80 Hz)
q
: Up
w
: Down
High Pass Filter
(Setting range: Filter OFF, 90 Hz, 135 Hz, 180 Hz, 225 Hz,
Default: Filter OFF)
q
: Up
w
: Down
SQ preset change
(Adjustable frequency: 60 Hz,160 Hz, 400 Hz, 1 kHz, 3
kHz, 6 kHz, 16 kHz, Setting range: –12 dB to +12 dB, 2
dB Step)
(Change of SQ Presetting
a
Page 14)
1
Press
[VOLUME]
(SEL
: Select
)
to
display the menu
display.
2
Press
[VOLUME] (SEL
: Select
)
to select
a mode to be adjusted.
3
Turn
[VOLUME]
(Volume) clock-
wise or counter-
clockwise to
adjust.
Note:
If no operation takes place for more than 5 sec-
onds in the audio menu (2 seconds in Main volume
adjustment and 10 sec. in the SQ preset change opera-
tion), the display returns to Regular Mode.
V
arious Audio Setting
The sound type changes every time you press
[SQ]
.
SQ is a function that can call up various sound types at
the touch of button in accordance with your listening
music type.
For SQ7, you can also make fine adjustments for SQ
presetting, P2-P6, according to your taste.
lights when activated.
Notes:
¡
Each SQ level is changeable. (
a
see below)
¡
Settings of SQ, bass/treble and volume are influenced
one another. If the influence mentioned above causes
distortion to the audio signal, readjust bass/treble or
volume.
CQ-C7300N
BAND
FLAT (default)
ROCK
POP
VOCAL
JAZZ
CLUB
Sound Selection according to Genre
(SQ: Sound Quality)
Change of SQ Presetting
You can make fine adjustment to the currently selected
SQ presetting in each type (except FLAT).
1
Hold down
[SQ]
(Sound Quality) for 2
sec. or more.
The targeted SQ preset appears.
2
Adjust each frequency.
Note:
If you press the
[DISP]
key, the presetting is
canceled. The presetting is active until another SQ
preset is called up.
[
[
]
: Higher frequency
[
]
]
: Lower frequency
q
: Level up
w
: Level down
3
Hold down
[
}
]
or
[
{
]
for 2 sec. or
more to confirm your adjustment.
Note:
You can select a SQ preset to be targeted
with
[
}
]
and
[
{
]
(and
[2]
-
[6]
on the remote con-
trol).
4
Hold down
[
}
]
or
[
{
]
for 2 sec. or
more to confirm your adjustment.
The existing adjustment is overwritten with new
adjustment.
Notes:
¡
FLAT is not changeable.
¡
The call-up screen is unchanged even after adjusting
any SQ preset.
¡
If no operation takes place for more than 10 seconds,
the display returns to the regular mode and the cur-
rent SQ setting is activated until switching to another
SQ.
¡
If you hold down
[BAND]
for 2 sec. or more on the
SQ call-up screen, the presetting that is called up can
be initialized.
¡
Other audio settings should be adjusted here as well.
(
a
Page 15)
CQ-C7300N
BAND
BAND
