19
English
Radio
Up to 6 stations can be preset in AM (MW/LW), FM1,
FM2, and FM3 respectively.
Preset stations can be simply called up by pressing
[
}
]
(P·SET)
or
[
{
] (P·SET)
.
Note:
Direct selection can be executed with
[1]
to
[6]
buttons on remote control.
Auto Preset Memory (APM)
1
Select a band.
2
Hold down
[BAND] (APM)
for 2 sec. or
more.
Up to 6 best receiving stations are preset.
The preset stations under best receiving conditions
are received for 5 sec. each after presetting the sta-
tions (SCAN). To stop scanning, press
[
}
]
or
[
{
]
.
Notes:
¡
New stations overwrite existing saved stations.
¡
Only RDS stations will be saved at default setting (AF
ON). To select non RDS stations too, set AF OFF. (
a
Page 21)
Manual station preset
1
Tune in to a station.
2
Hold down
[
}
]
or
[
{
]
for 2 sec. or
more.
3
Select a preset number by pressing
[
}
]
or
[
{
]
.
4
Preset the station by holding down
[
}
]
or
[
{
]
for 2 sec. or more.
Frequency/preset number blinks once.
Notes:
¡
New stations overwrite existing saved stations.
¡
In step 2, a station can be registered by holding down
the numeric button
[1]
to
[6]
for 2 sec. or more.
¡
To stop presetting stations, press
[DISP]
(Display)
.
CQ-C7300N
BAND
Note:
In AM mode, only LOCAL can be selected.
1
Press
[MENU]
to open the menu.
(
a
page 16)
For using the remote control, hold down
[MENU]
for 2 sec. or more.
2
Press
[MENU]
to select a mode to be
adjusted.
The selection/adjustment screen appears 1 sec. after
mode selection.
3
Press
[BAND] (SET)
to adjust the set-
ting value.
4
Press
[DISP]
to return to the regular
mode.
Note:
If no operation takes place for more than 10 sec-
onds, the display returns to Regular Mode.
FM MONO (Monaural)
Noise reduction when the receiving sensitivity becomes
low
Receiving in stereo (Default)
Receiving in mono and reducing the noise level
(
lights.)
FM LOCAL/AM LOCAL
Setting when searching for a station
Searching even for a relatively low-intensity radio
wave station (Default)
Searching only for a high-intensity radio wave station
(
lights.)
Often-tuned Station Preset
(APM: Auto Preset Memory, P·SET: Preset)
Radio Menu Display
MONO/LOCAL
18
Radio
1
Press
[SOURCE]
to select the radio
mode.
2
Press
[BAND]
to select a band.
Notes:
¡
For tuning in on only stations whose receiving
conditions are good in the station search, set
LOCAL to ON. (
a
page 19)
¡
For reducing noise when a receiving FM stereo
wave is weak, set FM MONO to ON. (
a
page 19)
3
Select a station.
Frequency adjustment
[
]
] (TUNE)
:
Lower
[
[
] (TUNE)
:
Higher
Note:
Hold down for 0.5 sec. or more and release
for station search.
Preset station selection
[
{
] (P·SET
: Preset
)
:
Lower preset number
[
}
] (P·SET
: Preset
)
:
Higher preset number
Note:
Direct selection can be executed with
[1]
to
[6]
buttons on remote control.
CQ-C7300N
BAND
Preset Number
Band
Frequency
LOCAL
Indicator
ST
(Stereo)
Indicator
Display change
Press
[DISP]
(Display) to change.
CT
Clock Time
Normal
Display off
Frequency
PS
CT
Display off
AM (MW/LW) mode:
FM (not RDS) mode:
This chapter explains how to listen to the radio.
Operation Flow
Radio Mode Display
