33
26
E
N
G
L
I
S
H
CQ-C3400/C3300/C3100W
32
25
E
N
G
L
I
S
H
CQ-C3400/C3300/C3100W
Electrical Connections
(continued)
(Only for CQ-C3400/3100W)
CD
.
C-IN
CQ-C3400W
CQ-C3100W
Ground Lead
To a clean, bare metallic part of the car chassis.
RCA Cord
CD Changer Input Cord
(R)(Red)
(L)(White)
Changer Control Connector
DIN cord
e
Power Connector
(Yellow)
(Black)
Extension Cord
(DIN/BATT/RCA/GND)
(Supplied with CX-DP880)
CD Changer
CX-DP880
(option)
Connection with a CD Changer (CX-DP880)
Battery Lead
To the car battery, cont12 V DC
¡
Only CQ-C3400W and CQ-C3100W can be connected to an optional CD changer (CX-DP880, CX-DP88) and
optional extension cord.
¡
For connection to a CD changer, refer to the operating instructions of corresponding device.
¡
For details, consult the shop where you purchased this product.
Speaker Connections
Caution:
Please follow the instructions given below. Failure to do so will cause damage to the unit and speakers.
¡
Use ungrounded speaker only.
¡
The maximum speaker input should be 50 W or more. (If used with
the optional power amplifier, the speaker input should be higher than
the maximum amplifier output.)
¡
The speaker impedance should be 4 - 8
Ω
.
¡
This unit uses the BTCL circuit, so each speaker should be connected
separately using parallel vinyl insulated cords.
¡
The speaker cords and the power amplifier unit should be kept away
(about 30 cm apart) from the antenna and antenna extension cord.
¡
Never connect the speaker cord to
the body of the car.
¡
Do not use a 3-wire type speaker
system having a common earth
lead.
¡
Do not connect more than one
speaker to one set of speaker
leads. (except for connecting to a
tweeter)
Fuse
Use fuses of the same specified rating (15 A). Using different substitutes or fuses with higher ratings, or connecting the
unit directly without a fuse, could cause fire or damage to the unit.
If the replacement fuse fails, consult the shop where you purchased this product.
Maintenance
Your product is designed and manufactured to ensure the minimum of maintenance. Use a dry, soft cloth for routine exteri-
or cleaning. Never use benzine, thinner, or other solvents.