29
22
E
N
G
L
I
S
H
CQ-C3400/C3300/C3100W
28
21
E
N
G
L
I
S
H
CQ-C3400/C3300/C3100W
1
2
r
Trim Plate
Screwdriver
To Remove the Unit
q
q
Switch off the power of the unit.
w
Press
[OPEN]
. The removable face plate
will be opened.
e
Push the face plate to either the right or
left.
r
Pull it out toward you.
OPEN
Installation
(continued)
Caution:
¡
Do not touch the contacts on the face plate or on the main unit, since this may result in poor electrical contacts.
¡
If dirt or other foreign substances get on the contacts, wipe them off with clean and dry cloth.
w
Remove the trim plate
r
with a screwdriver.
e
Pull out the unit while pushing down the lock
lever with the lock cancel plate
t
.
r
Remove the unit pulling with both hands.
1
2
t
Lock Cancel Plate
Pull out
Insert the tab
end in the
outer groove.
“Click”
Insert
Caution:
¡
This face plate is not waterproof. Do not expose it to water or excessive moisture.
¡
Do not remove the face plate while driving your car.
¡
Do not place the face plate on the dashboard or nearby areas where the temperature rises to high level.
¡
Do not touch the contacts on the face plate or on the main unit, since this may result in poor electrical contacts.
¡
If dirt or other foreign substances get on the contacts, wipe them off with a clean and dry cloth.
¡
To avoid damaging the front panel, do not push it down or place objects on it while it is open.
This unit is equipped with a removable face plate. Removing
this face plate makes the radio totally inoperable.
Place Removable Face Plate into
Case
q
Switch off the power of the unit.
w
Remove the removable face plate. (
a
Previous page)
e
Gently press the bottom of the case and open the cover.
Place the face plate into the case and take it with you when
you leave the car.
Install Removable Face Plate
q
Fit the face plate with its left hole on the left pins provided
on the main unit.
w
Fit the other hold on the other pin applying slight pressure.
e
Move the face plate up and down a few times to make sure
it is secure. Then close the front panel and press down the
right side of the face plate until it clicks into plate.
Security Indicator
The security indicator blinks when the removable face plate is
removed from the unit.
This function is activated when the Security Function is ON.
(
a
Page 24)
Panel Removal Alarm
This alarm sounds to warn you not to forget to remove the
panel before leaving your car.
This function is activated when the Security Function is ON.
(
a
Page 24)
Anti-Theft System
1
3
2
Security Indicator
Contact
Removable Face Plate Case
[OPEN]
3
2
4
Open
Pull out
Push
Contact
