XM Satellite Radio control
(continued)
Select a category
To turn the category selection on
1
Select [Setup].
The XM Setup screen is displayed.
2
Select [On] from “Category”.
Select [Off] to turn the category selection off.
To select a category
Select [
] or [
].
The category switches.
Note:
It is not possible to select a category if “Category” is
set to [Off].
Preset memory
The channel being received can be stored manually
under a selected number.
Select the channel, then touch and
hold the number under which you
wish to store the channel for at least
2 seconds.
The channel being received is stored under the
selected number.
Note:
6 channels can be stored for each channel list (XM1,
XM2, and XM3). (18 channels in total)
Select [Band] to switch between channel lists.
The channel list switches as shown below each time
[Band] is selected.
Select a stored channel
Select a channel (number) from the
preset channels.
The channel switches to the selected channel.
XM1
XM2
XM3
XM1
XM2
XM3
Traffi c information
Stores only one traffi c channel, either SIRIUS Satellite
Radio or XM Satellite Radio, so it can be called easily
from any Audiovisual source operation screen.
Select the channel, then touch and
hold [Traffi c] for 2 seconds or longer.
(Example: SIRIUS operation screen)
The channel being received is stored.
Select a stored channel
Select [Traffi c].
(Example: SIRIUS operation screen)
Note:
This function cannot be used if neither SIRIUS
Satellite Radio nor XM Satellite Radio is connected.
Channels which are parental locked cannot be stored.
English
English
10
11
11
10
