Panasonic CF-Y4 - Batt For Скачать руководство пользователя страница 70

Страница: 70 / 204

About CD Media

• Ultra-Speed CD-RW

MITSUBISHI KAGAKU MEDIA CO., Ltd.

Before using disks, carefully read through the Operating Instructions, the instructions for

handling the disks, and whatever is written on the disk packaging.

If the disks are not handled properly, they may become dirty or scratched, the writing speed

may be reduced or data may not be recorded or played back properly. Other damage may

result including drive failures.

Keep the following precautions.

Do not touch the data surface.

Keep the disk surfaces clean and free from dirt, dust and fingerprints, and do not allow

them to become scratched.

Do not write on the surface of the disk with a ballpoint pen or other writing instrument nor

paste any paper to it.

Do not drop, bend, or place heavy objects on top of disks.

Do not place or store disks in locations exposed to heat, direct sunlight, humidity or dust.

If the disk is brought from a cold into a warm environment, moisture may form on the disk.

Wipe this moisture off with a soft, dry, lint-free cloth before using the disk.

When disks are not actually being used, make sure to keep them inside their protective

cases or cartridges.

If the disk becomes dirty, clean it with the followings.

Handling Disks with Care

Содержание CF-Y4 - Batt For













































































































































































































Результаты поиска

Содержание CF-Y4 - Batt For

Отзывы:

Бренды по названию

Популярные бренды

Panasonic CF-Y4 - Batt For, Справочное руководство

Результаты поиска

Содержание CF-Y4 - Batt For

Отзывы:

Бренды по названию

Популярные бренды