11
E
CAUTION
If the port replicator is connected to the computer, connect the AC adaptor and the LAN cable to the
jack and port on the port replicator. You cannot use the LAN port on the computer.
Do not connect/disconnect peripheral devices in sleep (
Windows 7
)/standby (
Windows XP
)
or hibernation.
If devices connected to USB ports (2a, 2b, 2c) do not operate:
Confirm the AC adaptor is connected to DC-IN of the port replicator.
Try to connect via USB port 1.
Windows XP
For recognizing USB devices again, refer to the manual which belongs the computer itself.
When you use the computer that [USB Port] is displayed in [Advanced] menu of the Setup Utility,
confirm that [USB Port] is set to [Enable].
For more information about the settings and preparations of the peripheral devices, refer to the
peripheral devices’ own operating instructions.
When connecting the external display to either of the ports, lines or letters may blur. In that case,
lower the resolution.
●
●
●
•
•
●
●
●
