Panasonic CF-VEB311U, Руководство по эксплуатации

Страница: 12 / 44

12
E
Connecting/Disconnecting
Press down lightly on the rear
6
corners of the computer onto
the Port Replicator guide pins.
CAUTION
D o n o t a t t e m p t t o m a k e
●
connections if there is any object
between the computer and the
Port Replicator. Doing so could
damage the computer and the
Port Replicator.
Slide the lever until it exceeds
7
the mark of the “DOCK”, as
shown below to connect the
e x p a n s i o n b u s c o n n e c t o r
o f t h e P o r t R e p l i c a t o r .
(If necessary, lock the connection
by the anti-theft key.)
NOTE
The security lock key is also used
●
to prevent loss.
CAUTION
Do not attempt to move the Port
●
Replicator when it is connected to
the computer.
Set the Port Replicator up on a
●
flat surface. Setting up the Port
Replicator on an uneven surface can
result in poor contact.
Do not use the Port Replicator in a
●
location where it will be subject to
vibration, such as while riding a bike,
motorcycle, or car. The computer may
disconnect from the Port Replicator
and malfunction as a result.
If the computer malfunctions while
●
the Port Replicator is connected,
refer fi rst to the “Trouble Shooting
(Advanced)” in the computer’s
“Reference Manual”. If you still are
unable to solve the problem, turn off
the computer, disconnect the Port
Replicator (

page 13), connect the
AC adaptor to the computer, and
check to see if the computer operates
normally. If the computer operates
normally, the Port Replicator may be
malfunctioning. Contact Panasonic
Technical Support.
CF-VEB311U.indb 12 CF-VEB311U.indb 12 2010/07/09 16:26:44 2010/07/09 16:26:44