Panasonic CF-T8 series, Руководство по эксплуатации

Страница: 21 / 48

21
Get
ting St
arted
U
seful In
formati
on
Troubleshooting
Appendix
• When you do not frequently use CPU or the rotation noise of the fan bothers you, set [Standards] or [Low speed] in
[Fan control mode].
A
Click on the notification area.
B
Select [Standards] or [Low speed] in [Fan control mode].
Î Reference Manual “Setting the Power Plan Suitable for Each Scene”
„ When using peripheral devices
Follow these instructions and the Reference Manual to avoid any damage to the devices. Carefully read the instruction
manuals of the peripheral devices.
z Use the peripheral devices conforming to the computer’s specifications.
z Connect to the connectors in the correct direction.
z
If it is hard to insert, do not try forcibly but check the connector’s shape, direction, alignment of pins, etc.
z If screws are included, fasten them securely.
„ Preventing your computer from unauthorized use via wireless LAN/wireless WAN/Bluetooth
<Only for model with wireless LAN/wireless WAN/Bluetooth>
z Before using wireless LAN/wireless WAN/Bluetooth, make the appropriate security settings such as data encryption.
<Only for model that supports TPM>
„ Computrace
®
Software
Computrace
®
software tracks your stolen computer.
z Computrace
®
software is not included or installed in this computer.
z Consult Absolute Software Corp. before disposal.
z Refer to the following URL for Computrace
®
software for installation and available service regions. Note that this
service is only available in certain regions.
http://www.absolute.com
To clean display (LCD)
Use the soft cloth included with the computer (For more information, refer to “Suggestions About Cleaning the LCD Sur-
face” that comes with the soft cloth.)
Cleaning the display while the power is on may cause the computer to malfunction. Also, dirt on the touchscreen is eas-
ier to see when the computer is powered off, and so is easier to clean.
To clean the touch pad
Wipe lightly with a gauze or other dry, soft cloth.
To clean areas other than the LCD panel and touch pad
Wet a soft cloth with water or a diluted kitchen cleanser (neutral), wring the cloth out thoroughly, and wipe the dirty area
gently. Using a detergent other than a neutral kitchen cleanser (e.g., a weak alkali cleanser) may adversely affect
painted surfaces.
CAUTION
z Do not use benzene, thinner, or rubbing alcohol since it may adversely affect the surface causing discoloration, etc.
Do not use commercially-available household cleaners and cosmetics, as they may contain components harmful to
the surface.
z Do not apply water or detergent directly to the computer, since liquid may enter inside of the computer and cause
malfunction or damage.
Maintenance