14
Get
ting St
arted
First-time Operation
The battery charging starts automatically.
CAUTION
z
Do not disconnect the AC adaptor and do not switch the wireless switch to
on until the first-time operation procedure is completed.
z
When using the computer for the first time, do not connect any peripheral device
except the battery pack and AC adaptor.
z
Handling the AC adaptor
• Problems such as sudden voltage drops may arise during periods of thunder
and lightning. Since this could adversely affect your computer, an uninterrupt-
ible power source (UPS) is highly recommended unless running from the bat-
tery pack alone.
Slide and hold the power switch
for approximately one second until the
power indicator
lights.
CAUTION
z
Do not slide the power switch repeatedly.
z
The computer will forcibly be turned off if you slide and hold the power switch for
four seconds or longer.
z
Once you turn off the computer, wait for ten seconds or more before you turn on
the computer again.
z
Do not perform the following operation until the hard disk drive indicator
turns off.
• Connecting or disconnecting the AC adaptor
• Sliding the power switch
• Touching the keyboard, touch pad or touchscreen
• Closing the display
z
Do not change the Setup Utility until completing step
5
. If you do so, Windows
setup may not operate properly.
Follow the on-screen instructions.
z
After turning on the computer, “Please wait while windows sets up your com-
puter” appears, and then a small circle circulates on the screen. This will take
a few minutes.
z
During setup of Windows, use the touch pad to move the cursor and to click
an item.
z
Do not change the settings on the screen where you select a country or
region. You can set a country, region or keyboard layout in [Clock, Language,
and Region] of [Control Panel] after the Windows setup is complete.
z
Setup of Windows will take approximately 20 minutes.
Go to the next step, confirming each message on the display.
CAUTION
z
Do not turn off the computer until completing the first-time operation procedure.
z
You cannot choose the following words for user name and password: CON,
PRN, AUX, CLOCK$, NUL, COM1 to COM9, LPT1 to LPT9.
z
You can change the user name, password, image and security setting after
setup of Windows.
z
Remember your password. If you forget the password, you cannot use the Win-
dows. Creating a password reset disk beforehand is recommended.
A
Click
(Start) - [Control Panel] - [Additional Options] - [Tablet Calibration].
B
If [User Account Control] is displayed, click [Continue], or input password and
click [OK].
C
Touch each “+” using the stylus.
“+” is displayed in order at 9 locations.
3
Connect your computer to a power outlet.
4
Turn on the computer.
It takes approximately 10 minutes until the Windows setup screen appears. Do not
touch the keys and touch pad until it appears.
5
Setup Windows.
6
Perform the touchscreen calibration.
3
4
Содержание CF-T8 series
Страница 45: ...45 MEMO...
Страница 46: ...46 MEMO...
Страница 47: ...47 Operation Troubleshooting...
