28
T
ro
u
b
leshooting
Reinstalling Software
Before Reinstallation
1
Turn off the computer and insert the CD drive into the
multimedia pocket. (
“Multimedia Pocket”)
2
Turn on the computer, and press
F2
while [Panasonic]
boot screen is displayed.
The Setup Utility will start up.
If the password has been set, enter the Supervisor Pass-
word.
3
Write down all of the contents of the Setup Utility and
then press
F9
.
At the confirmation message, select [Yes] and then press
Enter
.
4
Select [Boot] menu, then select [CD Drive] and press
F6
until [CD Drive] is at the top of the [Boot] menu.
5
Place the Product Recovery DVD-ROM into the CD drive.
6
Press
F10
.
At the confirmation message, select [Yes] and press
Enter
.
The computer will restart.
7
Press
1
to execute [1.[Recovery]].
(You can cancel this operation by pressing
0
.)
The License Agreement screen should appear.
Reinstalling
8
Press
1
to select [1. Yes, I agree to the provisions above
and wish to continue!].
This screen should appear.
Preparing
You will need the Product Recovery DVD-ROM and CD drive.
Important
Before the reinstallation procedure, remove all peripherals (except for the CD drive).
Be sure the AC adaptor is connected until the reinstallation procedure is completed.
Even if reinstallation is executed, the number of times that the DVD video region code can be set will not be returned to
the state set at the time of factory shipment. (
page 34)
Windows XP
Windows 2000
9
Make a selection from the menu.
When selecting [2], enter the basic partition size for
the operating system installation and press
Enter
.
(The data partition size is the remainder after subtract-
ing the basic partition size.)
To select [3], the initial partition size must be 6 GB or
more of the hard disk size. Reinstallation cannot be per-
formed with a small partition size.
When reinstall procedure is performed, the contents of the hard disk will be erased. Be sure to back up any critical data that is
on your hard disk before running the reinstall procedure.
The reinstall procedure will return the computer to its original condition.
• If you have created partitions for data, the data may be erased or become corrupt as a result of the reinstall procedure.
---------------------------------------------------------------------
Select a number
---------------------------------------------------------------------
Reinstalling : Windows(R) XP Professional
1. Reinstall Windows to the whole HDD to factory default.
2. Make two partitions, for the operating system and data. And reinstall
Windows to the operating system partition.
(All existing partitions on HDD will be lost.)
3. Reinstall Windows to the first partition.
0. Cancel
---------------------------------------------------------------------
---------------------------------------------------------------------
Select a number
---------------------------------------------------------------------
Reinstalling : Windows(R) 2000 Professional
1. Reinstall Windows to the whole HDD to factory default.
2. Make two partitions, for the operating system and data. And reinstall
Windows to the operating system partition.
(All existing partitions on HDD will be lost.)
3. Reinstall Windows to the first partition.
0. Cancel
---------------------------------------------------------------------
Содержание CF-73JCLTXKM - Toughbook 73 - Pentium M 1.6...
Страница 42: ...42 Appendix Memo ...
Страница 43: ...43 Appendix ...
