Panasonic CF-52 Series Скачать руководство пользователя страница 22

Страница: 22 / 116

Multimedia Pocket

Carefully insert the device into the multimedia pocket by push-
ing both corners until it surely fits in the slot.

The computer must be on when inserting the device.

Insert the device with the label side up.

CAUTION

Hold the device by its both sides. Otherwise the device may be damaged.

When raising the slot side upward and inserting the device, be careful not to apply any
impact to the device.

When you carry the computer, confirm that the release button is surely locked so that
the device does not fall.

Be sure to insert the device into the multimedia pocket for use.

NOTE

You can see that the device is recognized or not by clicking

and then double-clicking

. If the device is not rec-

ognized (or if the media cannot be accessed), turn off the computer and reinsert the device.

Windows XP: by double-clicking

on the notification area

Содержание CF-52 Series





















































































































Результаты поиска

Содержание CF-52 Series

Отзывы:

Panasonic CF-52 Series, Справочное руководство, Страница: 22 / 116

Результаты поиска

Содержание CF-52 Series

Отзывы: