18
CQ-C9901W/C9801W
19
English
CQ-C9901W/C9801W
Radio
Radio
Sound Control
1
Press
[SRC: SOURCE]
to select the
radio mode.
2
Press
[BAND]
to select a band.
Notes:
¡
For tuning in on only stations whose receiving condi-
tions are good in the station search, set LOCAL to ON.
(
a
page 21)
¡
For reducing noise when a receiving FM stereo wave
is weak, set FM MONO to ON. (
a
page 21)
3
Select a station.
Frequency adjustment
[
]
]
(
TUNE
):
Lower
[
[
]
(
TUNE
):
Higher
Note:
Hold down for 0.5 sec. or more and release
for station search.
Preset station selection
[
{
]
(
P·SET: PRESET
): Lower preset number
[
}
]
(
P·SET: PRESET
): Higher preset number
Notes:
¡
Direct Access can be executed with
[1]
to
[6]
buttons on remote control.
¡
Stations in FM 1 to 3 are sequentially selectable
without changing bands when “ALL BAND” is
selected in “AUTO PRESET”.
Band
Frequency
Lights when
LOCAL
is
activated.
(
a
page 21)
Radio mode display
Preset Number
Lights while receiving an FM stereo signal.
(“STEREO”: CQ-C9801W)
Lights when
MONO
is activated.
(
a
page 21)
Operation Flow
SRC
CS
SRC
Indicates the intensity of
the radio wave.
A radio DSP is integrated into this unit. The IF filter allows the radio to adjust the bandwidth automatically to maintain optimum recep-
tion.
SOUND QUALITY Menu display
You can make a fine adjustment of SQ and Position.
1
Set the SQ mode to on.
2
Hold down
[CS] (SQ)
for 2 sec. or more
to display the audio menu display.
3
Press
[
}
]
or
[
{
]
to select a function to
be adjusted.
4
Press
[BAND]
(
SET
) to adjust.
5
Adjust the setting value.
[
}
][
{
][
]
][
[
]
:
Select
[BAND](SET)
:
Confirm
6
Press
[DISP]
to confirm the adjustment.
SQ PRESET SELECT
Select your favorite type from 6 kinds of SQ Presets.
Note:
You can also select the SQ preset number by
pressing
[1]
to
[6]
on the remote control.
SQ ADJUSTMENT (SQ9)
You can make a fine adjustment to the currently selected
SQ presetting in each type (except FLAT).
[
]
][
[
]
:
Frequency band selec-
tion
qw
:
Frequency selection
[
}
][
{
]
: Level up/down
Note:
If you hold down
[BAND]
for 2 sec. or more, the
presetting that is called up can be turned into the default.
SQ PRESET MEMORY
The current value is assigned to one of SQ preset 2 to 6.
1
Select a preset number by pressing
[
}
]
,
[
{
], [
]
]
or
[
[
]
.
2
Hold down
[BAND]
for 2 sec. or more.
Note:
You can also select the SQ preset number by
pressing
[2]
to
[6]
on the remote control, and assign the
current value to the selected preset number by holding
down the same button for 2 sec. or more.
POSITION
You can make the optimal sound field in accordance with
your seat.
SRC
CS
CS
Sound Control
