Panasonic BT-LH1770P, Руководство по эксплуатации

Страница: 39 / 80

- -
30
* When the power is turned OFF, the captured
image will be lost. If it is desired to save it for
future use, follow item
⑧
to store it in the USB
memory, and download it from the memory when
using it.
④
Manual switching mode between full capture
image and input signal image
・
This operation is possible after the full capture
mode described under item
③
has been executed.
・
Whenever the
RE
is pressed, the full capture
image and the image of the input signal will be
instantly switched over as illustrated on the dia-
gram at left, making it possible immediately to
compare the images.
By selecting a preferred moment to change over
the switch, it is possible to ascertain the compar-
ison of color
/ brightness / picture quality / position,
etc. on a partial basis.
・
This function can be assigned with the
F1
to
F4
switch on the front panel.
* The comparison of the image of the input signal
and the captured image can be performed only if
both images are in the same format. The com-
parison cannot be performed if the formats of
images of the input signal and the captured image
are different, or if the captured image has not
been stored in the memory of the monitor.
⑤
Automatic switching mode between full capture
image and input signal image
・
This operation is possible after the full capture
mode described under item
③
has been executed.
・
The full capture image and the image of the input
signal will be automatically switched over, mak-
ing it possible immediately to compare the imag-
es.
As images are switched over automatically, it is
possible to carry out adjustments such as posi-
tioning at ease while operating the camera.
・
The automatic switching can be set up by frame
according to the procedures described under item
⑥
.
・
This function can be assigned with the function
switch on the front panel.
* The comparison of the image of the input signal
and the capture image can be performed only if
both images are in the same format. The com-
parison cannot be performed if the formats of the
input signal image and the capture image should
differ, or if the captured image has not been
stored in the memory of the monitor.
⑥
Setting up the interval of the automatic switch-
ing mode
・
This operation is possible after the full capture
mode described under item
③
has been executed.
・
The interval of the automatic switching mode can
be specified by a unit of frame as shown below: .
1 FRAME
→ 2 FRAMES → 3 FRAMES → 5 FRAMES
→ 10 FRAMES → 30 FRAMES → 60 FRAMES →
・
Default setting is 3 FRAMES.
INPUT SIGNAL
CAPTURE
AUTO
CHANGE
INPUT SIGNAL
CAPTURE
・
･
CHANGE
INTERVAL
AUTO CHANGE MODE
MANUAL
CHANGE
MANUAL CHANGE MODE
DISPLAY IMAGE
CUR PIC：NORMAL
CHG→
EXIT→
ESC
SET
CUR PIC：NORMAL
CHG→
EXIT→
ESC
SET
CUR PIC：AUTO CHG
INTERVAL：3V
CHG INT→
EXIT→
ESC
CUR PIC：AUTO CHG
INTERVAL：3V
CHG INT→
EXIT→