Panasonic BT-LH1770P, Руководство по эксплуатации

Страница: 23 / 80

- -
14
◆
IN / OUT B
SDI CH-C
：
input
SDI CH-D
：
CH-B output
◆
IN / OUT C
SDI CH-C
：
input
SDI CH-D
：
CH-C output
◆
IN / OUT ABC
SDI CH-C
：
input
SDI CH-D
：
CH-A/B/C output
・
Default setting is OUT AB.
⑪
Setting the TEST PATTERN
・
Set the TEST signal to be displayed.
・
It can be set to the following 7 patterns.
・
Gray scale with pluge
・
Color Bar
・
100% Window
・
20% Gray
・
Pluge
・
Full Color Bar
・
-6.8
～
0%&100
～
109%
・
Refer to 2-1
⑥
for the pattern.
・
Default setting is the GRAY SCALE.
⑫ Setting the MIX TEST SIGNAL
・
By mixing the pluge signal (-2%/0%/+2%) and
100% to 109% signal into the image, you can ad-
just the image in real time by checking if white
part is filled out due to the CONTRAST adjust-
ment for the over 100% signal or if there is no
"black sun" effect cased by the BRIGHTNESS
adjustment.
・
This device automatically turns off the display
when the front volume is not operated for ap-
proximately one minute.
・
This function can be assigned with the function
switch on the front panel.
* Only SDI signals are supported.
・
Default setting is OFF.
Superimpose -2%, 0%, and
+2% of pluge signal.
-2% 0
%
+2%
Superimpose 100 to 109% of
brightness signal.
100 109 % 102 104 106
A
B
IN
IN
C IN
OUT B D
A
B
IN
IN
C IN
OUT C D
A
B
IN
IN
C
IN
D Mon OUT