Panasonic Bread Bakery SD-YD250, Руководство пользователя

Страница: 4 / 37

Cause Remedy
User-side
problems
1. Too much water
2. Too little flour
3. Too much tightening of the connector at the back of the bread
pan
1. Reduce water.
2. Observe the amount mentioned in the cookery
3. Do not tighten the connector too much.
Bread maker
problems
1. Insufficient gas let-out resulting from defective kneading blade
rotation. / Defect caused by the bread pan's mounting shaft unit
defects
1. Replace the mounting shaft unit.
1.1.6. Symptom : Wet bread bottom or dented bread's side faces
Cause Remedy
User-side
problems
1. Leaving of the bread in the bread pan 1. Take out the bread soon after baking is completed.
1.1.7. Symptom : Kneading blade does not turn. Abnormal sound while kneading
Cause Remedy
Bread maker
problems
1. Bearing defects in the bread pan
2. Insufficient kneading due to a belt
3. Motor defects (Normal resistance: See CHECK POINT )
1. Replace the mounting shaft unit.
2. Replace the belt.
3. Replace the motor
1.1.8. Symptom:Dry yeast does not drop from Yeast dispenser.
Cause Remedy
Effect caused
by static
electricity
1. Static electricity could cause a small amount of dry yeast to be
left in the dispenser.
Wipe the inner walls of the dispenser
with a wet cloth. After the inside
dispenser dries, put the yeast in
dispenser and see if it still sticks
inner walls of the dispenser. Ifit
doesn’t, static electricity has been
removed. You can use the bread
normally.
Bread maker
problems Check the operation of the solenoid and
yeast dispensing chute in
Motor operation test
.
1. The solenoid operates correctly, butthe chute closes and
opens irregularly.
2. The motor runs, but the solenoid does not run.
3. A replaced solenoid does not run.
1. Confirm the operation of the yeast dispensing
or lever and repair or replace the broken part
necessary.
2. Replace the solenoid.
3. Replace the PC Board Assembly.
1.2. CHECK POINT
4