Panasonic BL-WV10, Руководство по эксплуатации

Страница: 85 / 164

6 Setup Menu
85
the new user name and password. The new user name and password will not
overwrite user names and passwords for cameras that have already been
registered. You will continue to be able to use the existing user names and
passwords for those local cameras. To re-register those cameras with the new
user name and password, see page 128.
• If you aren't planning to access a camera with a computer, it is not necessary
to set a user name and password.
Wireless Settings
Change the wireless settings for the BL-WV10.
Setting Description
Wireless Mode Choose either repeater or access point mode.
Wireless
Format Choose from 802.11b, 802.11g only or 802.11b/g.
SSID Set the identifier for the wireless network local in use.
SSID Stealth
Mode Choose either [Enabled] or [Disabled].
To make wireless LAN networks easier to detect, the network
identifier, or SSID, is regularly transmitted. Turning the stealth
features off will allow the network to be easily detected, but
unauthorized users may also attempt to access the network as
a result, resulting in a possible security issue. Turning the
stealth features on will deny access through ANY key, making
the network harder to detect.
Channel The communications channel to be used can be chosen from
either AUTO or a number between 1 and 13.
Choosing AUTO will allow the BL-WV10 to automatically detect
an available channel at launch. If the quality of the connection
is not good, you can manually choose another channel as well.
Encryption Choose to enable or disable encryption.
Sets an encryption key when encryption is turned on.
BL-WV10_OI.book Page 85 Thursday, January 26, 2006 8:03 PM