background image

PNQX1294ZA

   KK0508MJ0

Getting Started

PLC Adaptor Starter Pack

Power Line Communication

Set of 2 Adaptors (Master and Terminal)

Included items

Example of an integrated 

HD-PLC

 network

Installation

Placing the adaptors

Connecting adaptors to network devices

For best results

Avoid connecting high power-consuming appliances to the same wall outlet. Additionally, 
connecting an adaptor to a uninterruptable power supply (UPS) or backup power supply 
device is not recommended.
While connecting the adaptors to a wall outlet is recommended, keep the following in mind 
if you must connect an adaptor to a power strip:

- Make sure the power strip does not a have a noise filter or a surge protector, as these 

features may interfere with the performance of your adaptors.

- Do not connect the adaptor to a power strip that receives power from another power 

strip.

- Use a power strip with an AC cord that is as short as possible.

For more information, refer to the included Operating Instructions.

For Best Performance

We recommend plugging the adaptor directly into a wall outlet whenever possible.

AC adaptors and battery chargers (such as cell phone chargers) may interfere with 
the performance of this product. We recommend connecting such devices to a power 
strip which has a noise filter.

You can test the speed of each terminal’s network connection. Refer to the included 
Operating Instructions for details.

Model No.

BL-PA300KTA

PLC Adaptor 

×

 2

One adaptor is pre-configured as the “master” adaptor, 
and the other is pre-configured as the “terminal” adaptor.

LAN Cable 

×

 2

Order No.: PQJA10138Z

Connects each adaptor 
to a network device.

Connect the adaptor to a wall outlet in the room where you plan to use it.

Confirm that the 

PLC

 indicator of each adaptor lights in green when you plug 

the adaptors into the wall outlets.

• If the indicators are not lit as shown below, confirm all connections and refer to the 

troubleshooting section of the Operating Instructions.

Connect a LAN cable to each adaptor’s 

LAN

 jack.

The 

LAN

 indicator of each adaptor turns green.

Connect the other end of each LAN cable to a network device.

• If the indicators are not lit as shown below, confirm all connections and refer to the 

troubleshooting section of the Operating Instructions.

PLC

LAN

MAST

ER

HD

-PL

C

BL

-PA

300

SE

TU

P

MASTER TERMINAL

PLC

LAN

MAS

TER

HD

-PL

C

BL

-PA

300

SET

UP

MASTER TERMINAL

INTERNET

Master

PC

Network printer

Wall outlet

Wall outlet

Wall outlet

Hub

Network camera

Modem

Router

PC

Terminal

 (PLC Adaptor

Add-on Unit)

Terminal

Additional 
adaptors can 
be added 
later, for a total 
of 16 adaptors 
including the 
master. See 
the Operating 
Instructions for 
details.

1

2

PLC

LAN

MAST

ER

HD-

PLC

BL-P

A30

0

SETUP

PLC

LAN

MAST

ER

HD-

PLC

BL-P

A30

0

SET

UP

MASTER TERMINAL

MASTER TERMINAL

MASTER

TERMINAL

PLC

LAN

MASTER

(green) (orange) (green)

PLC

LAN

MASTER

(orange)

(off)

(green)

3

4

PLC

LAN

MAST

ER

HD-

PLC

BL-P

A30

0

SET

UP

PLC

LAN

MAST

ER

HD-

PLC

BL-P

A30

0

SET

UP

MASTER

connect to a 
router or modem

connect to a 
network device

TERMINAL

PLC

LAN

MASTER

(green)

(green)

(off)

PLC

LAN

MASTER

(green)

(green)

(green)

Recommended

Outlet

AC adaptor

Charger

Noise filter power strip

Not Recommended

Outlet

Noise filter power strip

Outlet

Outlet

AC adaptor

or charger

or

AC adaptor 
or charger

This document is written to be used with the BL-PA300KTA, which is a pre-configured set 
of 2 adaptors.

No settings are required to use these adaptors. Simply follow the instructions provided in 
this document. Refer to the included Operating Instructions for safety, reconfiguration, 
and troubleshooting information.

BL-PA300KTA_GS.book  Page 1  Tuesday, June 24, 2008  4:20 PM

Отзывы: