Operating Instructions
77
10.
Click [Save] after confirming the settings.
•
New settings are saved. The buffered images are deleted.
•
When finished, "Success!" is displayed.
11.
Click [Go to Image Buffer/Transfer page].
•
The Image Buffer/Transfer page is displayed.
Notes
•
If you set a short interval to transfer image to a mobile phone, many E-
mails may be sent to it leading to a large phone bill. Therefore, we
recommend you to set a long interval. In an emergency situation, the E-
mail transfer can be stopped by enabling privacy mode using a mobile
phone (see page 27).
•
Sensor transfer stops its operations until the camera finishes all transfers.
For example, if the camera transfers 3 images per minute and 6 images in
total with setting 1 minute of sensor deactivation time, the sensor will be
in the following operation.
•
Buffered images will be deleted by doing the following.
•
Turning off the camera.
•
Saving the settings of Image Buffer/Transfer or Date and Time.
•
Executing [Restart], [Update Firmware] or [Reset to Factory Default].
•
Clicking [Delete Buffered Images] on the Image Buffer/Transfer page
(see page 68).
Setting
Description
Disable
•
The camera does not send an E-mail notification when
buffering or transferring image.
Enable
•
The camera sends an E-mail notification (up to 3
destinations) when buffering or transferring image.
Detectable
Undetectable
Undetectable
1st
2nd 3rd 4th
5th 6th
120 seconds
A heat change occurs.
Detectable
Sensor
deactivation time
1 minute
Содержание BL-C30
Страница 115: ...Operating Instructions 115 Index ...