![background image](http://html.mh-extra.com/html/panasonic/bl-c1/bl-c1_operating-instructions-manual_277386093.webp)
Operating Instructions
93
5.2
Configuring Multiple Cameras
The Multi-Camera Setup page allows you to configure camera IP addresses and
camera names to view multiple images on the Multi-Camera page. These
configurations are required to use the Multi-Camera page. Up to 12 cameras can
be configured. The Selfcamera is registered at No. 1 by default.
1.
Click [Multi-Camera] on the Setup page.
2.
Click
Add
.
Note
•
If you click the camera number, the modification page is displayed.
Camera settings can be modified or deleted here.
•
If you configured multiple cameras, you can change the camera number.
Select the number, and click [Move].
3.
Set each parameter.
•
Clicking [Cancel] cancels your settings without saving changes.
•
By clicking [Clicking this link, enters this camera's settings.], the settings
of the Selfcamera are entered automatically. "selfcamera" is displayed for
the IP Address or Host Name, "--" is displayed for the Port No., and the
model no. is displayed for the Camera Name.