![background image](http://html.mh-extra.com/html/panasonic/bl-c1/bl-c1_operating-instructions-manual_277386039.webp)
Operating Instructions
39
Host Name
(DHCP Only)
•
If your ISP uses the DHCP function, which automatically
assigns an IP address to the camera, enter the ISP-
assigned host name. (The host name may be used as an
authentication.)
•
Enter ASCII characters for the host name (see page 131).
Note that [Space], ["], ['], [&], [<] and [>] are not available.
Default Gateway
*1
(Static/DHCP Only)
•
If you have been assigned a Default Gateway address by
your ISP or network administrator, enter it in this data field.
•
Set 4 numbers (0—255) and 3 periods, such as
"192.168.0.253". Note that "0.0.0.0" and
"255.255.255.255" are not available.
DNS Server
Address
*1
(Static/DHCP Only)
•
The DNS server address is required in the following situations:
–
Transferring camera images by E-mail or FTP
–
Setting cameras by their host names on the Multi-
Camera Setup page
–
Using the DynamicDNS service
–
Using the sensor log notification
•
If you have been assigned a DNS server addresses by
your ISP or network administrator, enter them in this data
field. There are usually two addresses.
•
Set 4 numbers (0—255) and 3 periods, such as "192.168.0.253".
Note that "0.0.0.0" and "255.255.255.255" are not available.
Max. Bandwidth
Usage
•
The bandwidth can be restricted.
•
Select a maximum bandwidth from [Unlimited] to [0.1 Mbps].
Note
Set a maximum bandwidth referring to the following file
sizes. These are examples for a JPEG file of standard
image quality. File sizes may change depending on the
image quality or the brightness of the object.
160 × 120 pixels: About 3 KB (24 Kbit)
320 × 240 pixels: About 10 KB (80 Kbit)
640 × 480 pixels: About 18 KB (144 Kbit)
Connection Type
•
Select [Auto Negotiation] normally. If the camera cannot be
accessed, see page 7 of Troubleshooting on the CD-ROM.
*1
If the IP address is automatically obtained from a DHCP server, this field does not need to be
set.
Setting
Description