Making/Answering Calls (Handset)
33
For product assistance, visit www.globarange.com
For
A
assistance, visit www.joip.com
L
k
If another phone is connected to
the same line (page 19), you can also
take the call by lifting its handset.
MUTE button
N
While mute is turned on, you can hear
the other party, but the other party
cannot hear you.
To mute your voice, press
{
MUTE
}
.
L
To return to the conversation, press
{
MUTE
}
.
Note:
L {
MUTE
}
is a soft key visible on the
handset display during a call.
L
When this feature is turned on,
{
MUTE
}
flashes.
FLASH button
N
k
Pressing
{
FLASH
}
allows you to use
special features of your host PBX such
as transferring an extension call, or
accessing optional telephone services.
Note:
L
To change the flash time, see page
56.
l
Pressing
{
FLASH
}
allows you to use
optional services from
A
. Visit
www.joip.com or contact the
A
service provider for details.
Making another call on the IP line:
While you are talking with an outside
caller, you can make a 2nd call on the
same line by pressing
{
FLASH
}
then
dialing.
L
The 1st call is put on hold.
L
To hang up the 2nd call, press
{
OFF
}
.
The alarm tone starts to sound. Press
{
IP
}
to talk with the 1st caller again. If
you do not press
{
IP
}
, the alarm tone
sounds for 1 minute and the 1st call is
disconnected.
You can combine the calls to make a
conference call by pressing
{
FLASH
}
again after the 2nd call is connected.
L
To hang up the 2nd call and talk with
the 1st caller, press
{
FLASH
}
.
L
To hang up both lines, press
{
OFF
}
.
For Call Waiting service users
N
Call Waiting service is provided by your
landline service provider and
A
.
This feature allows you to receive calls
while you are already talking on the
phone. If you receive a call while on the
phone, you will hear a Call Waiting tone.
Press
{
CALL WAIT
}
to answer the 2nd
call.
L
To switch between calls, press
{
CALL
WAIT
}
.
Note:
L
k
Please contact your landline
service provider for details.
L
l
Please visit www.joip.com or
contact the
A
service provider for
details.
Temporary tone dialing (for
rotary/pulse service users)
k
N
You can temporarily switch the dialing
mode to tone when you need to access
touch tone services (for example,
answering services, telephone banking
services, etc.).
Press
{*}
(TONE) before entering
access numbers which require tone
dialing.
Handset clarity booster
N
This feature can improve sound clarity
when the handset is used in an area
where there may be interference. During
an outside call, this feature is turned on
GT15xxC.book Page 33 Tuesday, July 24, 2007 7:17 PM
