Operation manual for “High Current connectors B01/B02”
©
Panasonic Corporation 2017
ACCTF34E 201710
Panasonic Corporation Electromechanical Control Business Division
industrial.panasonic.com/ac/e/
2
01. Introduction
Our B2B connector for battery is designed for a high-performance and quick battery
charging of mobile device and a high electrical current of 6A(B01) or 10A(B02) is available.
Furthermore, the shape is ultra-small and low-profile design .
B01
：
stacking height of 0.6mm / 0.8mm , width of 2.4mm
B02
：
stacking height of 0.7mm , width of 2.2mm
This connector is designed for a high electrical current. Therefore, use the connector properly
on the basis of the connector’s specifications.
This connector is also designed with the durability and workability in mind.
However, the thickness of the molded part has been further reduced. Accordingly,
pay attention when using the connector and read this document before designing a product
and starting production.
B01 / B02
A35US
Application
For Battery(
Power
) connect
For
Signal
connect
Space-saving
Excellent
Width:
B01:2.4mm
B02:2.2mm
Excellent
Width:
2.2mm
Low profile
Excellent
Mated height
B01: 0.6mm/0.8mm
B02: 0.7mm
Excellent
Mated height
0.6mm
Wiring underneath
Good
Exposed metal
part on the
rear face
Exposed
metal part
Good
Exposed metal
part on the
rear face
Exposed
metal part
Contact reliability
Excellent
Excellent
Drop resistance
Very good
Bellows-type
contact
With a thin plastic part
Very good
Bellows-type
contact
With a thin plastic part
Mountability
Excellent
Header needs
special nozzle
Excellent
Header needs
special nozzle
Clicking feedback
Excellent
Excellent
2.2mm
0.6mm
Header
pickup
space:
0.8mm-
wide
bottom
Header
pickup
space:
0.7mm-
wide
bottom
B01
：
2.4mm
B02
：
2.2mm
B01
：
0.6mm
B02
：
0.7mm
/0.8mm
