6
e
Place the cover back on the pan/tilt head.
* Be sure not to trap the wires.
SW 2
SW 1
SW 3
SW 2
SW 1
DESKTOP
HANGING
■
Lens Mounting
• Turn the lens lock ring knob fully counterclockwise.
• If the lens mount has a cap, remove the cap.
• With the lens positioning pin up, mount the lens.
• Turn the lens lock ring knob clockwise till the lens is
securely fastened.
Lens lock ring knob
CONNECTIONS
• Before making any connection, switch off all the compo-
nents of the system.
• Use the control panel AC Adapter AW-PS301 (optional)
and pan/tilt head AC Adapter AW-PS300 (optional).
• Use the Pan/tilt Head AW-PH300.
• Locally purchase a DC cable with a nominal cross sec-
tion of 1.25 mm
2
or larger that meets the Electric
Appliance Control Law, and connect the pan/tilt head
AW-PH300 to the Pan/tilt Head AC Adapter AW-PS300
with that cable. The maximum distance between the
pan/tilt head and pan/tilt head AC adapter is 30 m.
• Connect the AC Adapter AW-PS301 to the control panel
and clamp the DC cable of the AC adapter to the cord
clamp on the control panel.
• Connect the iris control cable of the motor-driven zoom
lens to the camera and the remote (zoom/focus control)
cable to the pan/tilt head. If the remote (zoom/focus
control) cable of the motor-driven zoom lens is connect-
ed to the camera, the lens cannot be controlled.
Cord Clamper
DC Cord
AC Adaptor AW-PS301
(for Pan/tilt Head)