background image

3

  1) Read these instructions.

  ) Keep these instructions.

  3) Heed all warnings.

  4) Follow all instructions.

  5) Do not use this apparatus near water.

  6) Clean only with dry cloth.

  7)  Do  not  block  any  ventilation  openings.  Install  in 

accordance with the manufacturer’s instructions.

  8)  Do  not  install  near  any  heat  sources  such 

as  radiators,  heat  registers,  stoves,  or  other  
apparatus (including amplifiers) that produce heat.

  9)  Do not defeat the safety purpose of the polarized 

or  grounding-type  plug.  A  polarized  plug  has  two 
blades with one wider than the other. A grounding-
type  plug  has  two  blades  and  a  third  grounding 
prong.  The  wide  blade  or  the  third  prong  are 
provided for your safety. If the provided plug does 
not  fit  into  your  outlet,  consult  an  electrician  for 
replacement of the obsolete outlet.

  10)  Protect  the  power  cord  form  being  walked  on  or  

pinched  particularly  at  plugs,  convenience 
receptacles,  and  the  point  where  they  exit  from  
the apparatus.

  11)  Only  use  attachments/accessories  specified  by  

the manufacturer.

  1)  Use  only  with  the  cart,  stand,  tripod,   

bracket,  or  table  specified  by  the 
manufacturer,  or  sold  with  the 
apparatus. When  a  cart  is  used,  use   
caution 

when 

moving 

the 

 

cart/apparatus  combination  to  avoid 
injury from tip-over.

  13)  Unplug  this  apparatus  during  lightning  storms  or 

when unused for long periods of time.

  14)  Refer  all  servicing  to  qualified  service  personnel. 

Servicing  is  required  when  the  apparatus  has 
been damaged in any way, such as power-supply 
cord or plug is damaged, liquid has been spilled or  
objects  have  fallen  into  the  apparatus,  the 
apparatus  has  been  exposed  to  rain  or  moisture, 
does not operate normally, or has been dropped.

Read  these  operating  instructions  carefully  before  using  the  unit.  Follow  the  safety  instructions  on  the  unit  and  the 
applicable safety instructions listed below. Keep these operating instructions handy for future reference.

IMPORTANT SAFETY INSTRUCTIONS

Safety precautions

 indicates safety information.

Содержание AWHE100N - HD INTEGRATED CAMERA











































Отзывы: