Panasonic AW-RP60G, Ручное обновление изменений

Страница: 16 / 17

ENGLISH AW-RP60G
-16-
Item Details Supported versions
SW LINK Sets linking with the switcher to ON/OFF.
2.10-00-0.01 and later
UPDATE Saves the settings. The settings are not applied until you press
this button to upload the information.
SW IP Sets the IP address of the switcher to be connected.
PORT Sets the port number of the switcher to be connected.
BUS CONT Sets selection of the bus material from the unit to the switcher
to enabled/disabled (ON/OFF).
BUS Sets the switcher bus to link with the camera selection buttons
of the unit when [BUSCONT] is “ON”.
Setting values: AUX1 to 16, ME1PVW, ME1KEY1-S/F,
ME1KEY2-S/F, ME1KEY3-S/F, ME1KEY4-S/F, ME2PVW,
ME2KEY1-S/F, ME2KEY2-S/F, ME2KEY3-S/F, ME2KEY4-S/F,
DSK1-S/K, DSK2-S/K, DSK3-S/K, DSK4-S/K
FOCUS ASSIST Switches video between multi view and the selected camera
video by controlling the AUX bus of the switcher. This is
indicated by “
ー
” at unit startup.
ON:
Switches to the assigned remote camera.
OFF(MV1)
:
Switches the AUX bus video output from the
switcher to MV1.
OFF(MV2)
:
Switches the AUX bus video output from the
switcher to MV2.
OFF(MV3)
:
Switches the AUX bus video output from the
switcher to MV3.
OFF(MV4)
:
Switches the AUX bus video output from the
switcher to MV4.
MV1 to MV4 Assigns the AUX buses to MV1 to MV4.
Output buses (MV1 to MV4): OFF , AUX1 to AUX16
TALLY IP Sets the receiving of tallies from the switcher to ON/OFF.
CAM INFO Sets camera title display on the MV of the switcher. When this
is set to “ON”, the camera title is displayed.
CAM NAME Sets whether or not to display the camera name when the
camera title is displayed on the MV of the switcher. When this
is set to “ON”, the camera name is displayed.