ENGLISH
AW-RP60G
-14-
Functions Linking with AK-HRP1000/AK-HRP1005 (Version 2.10-00-
0.01 and Later)
The camera selection on the AK-HRP1000 and AK-HRP1005 can be linked with the camera selection on
this unit.
Set the operation in [ROP LINK] of the [SYSTEM] menu.
Item
Details
Supported versions
ROP IP
Sets the IP addresses of the ROP to be connected.
2.10-00-0.01 and later
PORT
Sets the port number of the ROP to be connected.
UPLOAD
Saves the settings of [ROP IP] and [PORT] to the unit. The
settings are not applied until the information is uploaded.
CAM No. SEL Assigns the camera number of ROP to the number of the
camera controlled by the unit.
Select the camera number of the unit in [CAM SEL], and set the
camera number of ROP to assign in [ROP CAM]. For a camera
number that will not be assigned, set [ROP CAM] to “NON”.
Default values
[ROP CAM] has “1 to 99” assigned for “CAM1 to CAM99” of
[CAM SEL].
“CAM100 to CAM200” of [CAM SEL] are set to “NON”.
ROP CAM No.
AW LINK SW
Sets linking to ON/OFF. When this is “OFF”, camera selection is
not linked.
NOTE
To actually enable this operation, you also need to set the setting on the AK-HRP1000/AK-HRP1005. The setting
can be set from [AW CONTROLLER LINK] of the ROP menu.
[ROP LINK] of [SYSTEM] menu
