Setting the Use of PAN/TILT Lever and ZOOM Button
①
The following setting can set the use of PAN/TILT lever and ZOOM button.
Menu: (9) SETUP > [2] SW LINK => 7. P/T LEVER => [Self, SW, Button Select] * Default: [Self]
- [Self]: For controlling the remote cameras
- [SW]: For changing the setting values on AW-HS50
* This use of PAN/TILT lever and ZOOM button can be enabled while the following sub-menus are shown on
AW-HS50.
[3] PinP Menu:
PinP’s position can be changed using PAN/TILT lever, and its size using ZOOM button.
[6] ChromaKey Menu: While the chroma key marker is shown, its position can be changed using PAN/TILT
lever, and its size using ZOOM button.
[2] Wipe Menu:
When the wipe patterns 9 – 13 (Wipe Menu: 1. Pattern) are selected, the wipe start
position can be changed using PAN/TILT lever.
- [Button Select]: Switching between [Self] and [SW] is possible using “PT ACTIVE button”.
=> Indicator lights up: [Self], Indicator blinking: [SW], Indicator goes off: PAN/TILT lever operations disabled
(ZOOM button: Enabled for remote camera’s zooming operations)
Setting the USER buttons
The above-mentioned functions can be assigned to the AW-RP50 USER buttons so that the desired function can be
activated simply by pressing the USER button.
①
Setting for assigning the functions to the USER buttons
Menu: (9) SETUP > [1] USER > 1. USER1 or 2. USER2 => [“desired function”]
* Assignable linked-up functions: SWLINK, BUSCONT, FASIST, CAMSEL, TALLY_IP, CAMIF, ND FILTER
