7. Mounting of the Betacam Format VTR
7-1 Mounting the optional VTR Adaptor WV-VT16A
Mount the VTR Adaptor by connectlng the 68-pin con-
nector on the camera and the VTR Adaptor, and
engage the lock mechanism of the VTR Adaptor and
the camera head. Then tighten two VTR Adaptor
Holding Knobs firmly and make sure the VTR Adaptor
is securely fixed to the camera.
7-2 Mount the VTR on the VTR adaptor while engaging the
connectors and lock mechanism
7-3 Secure the VTR with two screws which come with the
VTR.
- 36 -
8. Installation of the AC Adaptor/Charger
WV-PS34
When the AC Adaptor/Charger, WV-PS34, is used
with the ENG/EFP Colour Camera as an AC Adaptor,
this installation procedure should be followed:
8-1 lnstall t h e AC Adaptor/Charger on t h e rear of the
c a m e r a b y matching t h e recesses in t h e AC
Adaptor/Charger with the rails on the camera and
then sliding it down the rails.
8-2 Connevt the 4-pin cable to the 4-pin external DC
Input connector on the camera.
8-3 When removing the AC Adaptor/charger, disconnect
the 4-pin cable and remove the AC Adaptor/Charger
by sliding it
up while pressing the Release Button
- 37 -
