Panasonic AVCCAM AG-HMR10P, Инструкция по эксплуатации

Страница: 92 / 110

92
Setup menu list (continued)
DISPLAY SETUP
Item
Display
mode
Description of settings
ZEBRA CAM Sets the level of the zebra pattern that is displayed on the LCD monitor screen.
OFF, 105%, 100%, 95%, 90%, 85%, 80%, 75%, 70%, 65%, 60%, 55%, 50%
SAFETY ZONE CAM Sets the display method for the safety zone. (Page 78)
90%, 4:3, OFF
FOCUS BAR CAM Sets whether to display the focus assist bar.
ON OFF
Select [ON] to display the focus assist bar.
REC COUNTER SDI/CAM Selects the counter operation during recording.
TOTAL: Continues counting until the counter is reset.
CLIP: Resets the counter at the start of recording to count the recording time
for each clip.
•
In PB mode, operation is always in CLIP mode.
OUTPUT OSD SDI/CAM
PB ON OFF
Select [ON] to output the information displayed on the LCD monitor screen
together with the video as a video output signal.
DATE/TIME SDI/CAM
PB Selects the date and time to display on the LCD monitor or overlay and output on
the video.
TIME: Displays/outputs the time.
DATE: Displays/outputs the date.
TIME & DATE: Displays/outputs the date and time.
OFF: Does not display/output the date and time.
LEVEL METER SDI/CAM
PB Sets whether to display the audio level meter.
ON OFF
ZOOM &
FOCUS CAM Sets whether to display the zoom value and focus value.
ON OFF
CARD &
BATTERY SDI/CAM
PB Sets whether to display the remaining SD Memory Card capacity and the
remaining battery capacity.
ON OFF
OTHER
DISPLAY SDI/CAM
PB Sets the amount of information to display on the LCD monitor screen. (Page 82)
ON OFF
LCD
BACKLIGHT SDI/CAM
PB Adjusts the backlight of the LCD monitor. Set to [HIGH] for a brighter backlight.
LOW NORMAL HIGH
LCD DTL SDI/CAM Emphasizes the edges of the video displayed on the LCD monitor screen.
ON OFF
LCD SET SDI/CAM
PB Adjusts the LCD monitor. (Page 32)
LCD COLOR LEVEL: Adjusts the color density of the screen.
LCD BRIGHTNESS: Adjusts the brightness of the screen.
LCD CONTRAST: Adjusts the contrast of the screen.
indicates the factory default setting.