101
3. System settings
3-1. Setting the system format
One system format (input/output signal) can be selected.
Do not change the format during any of the following
operations:
p
When reading from a memory card or saving to a
memory card
p
When restoring data from video memory or saving data
to flash memory
p
When recording moving images or still images
p
When moving images are playing
1
Press the
s
button to light its indicator, and display the
System menu.
2
Use [F1] to display the Format sub menu.
3
Use [F2], select the format using the Format item, and
press the [F2] to enter the selection.
Setting the 16:9 squeeze mode
When the 16:9 squeeze mode is selected, a border width
(wipe or PinP) is established that considers cases where SD
format images are to be converted into the 16:9 aspect ratio
and used.
This setting is possible when SD is selected as the system
format setting.
On the Format sub menu, use [F4] to select whether to
support the squeeze mode using the 16:9 Squeeze item.
On
The squeeze mode is supported.
Off
The squeeze mode is not supported.
Border width (graphical representation) when the squeeze
mode is supported
Squeeze (4:3)
16:9
