6.2.3 Outside Speaker Level DAY/NIGHT
The Outside Speaker level can be set up. Day/Night setup can be made by button operation at the front panel of this unit.
When the Day mode is set, the Outside SP Level indicator of the center module will light in yellow. When the Outside SP
Level button is pressed, the Night mode is assumed and this indicator will disappear. DAY mode: Normal level NIGHT
mode: 50% level (Attenuation)
Note:
• If POS Remote is set for ON, you have to note that no button operation of the Outside Speaker Level is possible at the
center module.
6.2.4 Vehicle Detector Normal/Override On
The Vehicle Detector operation can be set up. Normal/Override On setup can be made by button operation at the front
panel of this unit. When the Override On mode is set, the V/D Override indicator of the center module will light in yellow.
When the V/D Override button is pressed, the Normal mode is assumed and this indicator will disappear.
NORMAL:
The vehicle detector turns on only when a vehicle is detected at the menu board. When the detector turns on,
a beep tone is heard in the headset. When the Talk button is pressed on the Order Taker or All-in-One Headset side,
the Outside Speaker and the Outside Microphone are turned ON at the menu board. When the vehicle leaves, the
vehicle detector turns off. When setting the normal position, Auto Talk Lock mode is enabled.
OVERRIDE ON:
The vehicle detector is always turned on. When setting the override on position, Auto Talk Lock mode is
invalid.
