Remote Controller buttons and display
4
3
2
1
5
6
7
1
Mode selection
Depending on the pre-set outdoor
temperature, the system selects
HEAT or
*1
COOL operation mode.
Depending on the pre-set outdoor
temperature, the system selects
HEAT + TANK or *1 COOL + TANK
operation mode.
The panel/floor HEAT operation is
either turned ON or OFF. The
outdoor unit provides heat to the
system.
The outdoor unit provides heat to the
water tank and the system.
This mode can be selected only
when the water tank is installed.
The fan coil unit is either turned ON or OFF.
The outdoor unit provides cooling to the system.
The outdoor unit provides cooling to the system.
The system controls the booster heater in the water
tank.
The water tank is either turned ON or OFF.
The outdoor unit provides heat to the water tank.
* The direction icons point to the currently active mode.
Room operation / Tank operation.
Deice operation.
*1 The system is locked to operate without COOL mode. It can be unlocked only by authorised installers or our authorised service partners.
*2 Only displayed when COOL mode is unlocked (This means when COOL mode is available).
8
