KW8M Eco-POWER METER (1A/5ACT input type)
21
4.2.2 MODE2
(Mode for setting of each parameter for pulse measurement)
Max. counting speed setting mode
Hz
Mode defines max. counting speed.
・
Select from 2000(2kHz)/30(30Hz).
Pre-scale setting mode
PSCL
Mode defines pre-scale value used for changing count value.
・
It can be set the range of 0.001 to 100.000. (Initial 1.000)
・
The position of decimal point set with this mode is applied to count value and preset value.
ex) When 0.01 (Last 2-digit) is set, the decimal point of count value and preset value has 2 digit
under decimal point.
MODE2 Setting flow chart
Monitor
↓
<MODE>
MODE 1 display
↓
<ITEM/
△
>
MODE 2 display
↓
<SET>
Max. counting speed setting mode
Press <ITEM/
△
>, <SHIFT/
▽
> to change 2000 (2kHz)
⇔
30(30Hz).
2000
30
↓
<SET>
Pre-scale setting mode
Set pre-scale value using <ITEM/
△
>, <SHIFT/
▽
>, < >, < >.
(0.001 to 100.000, initial: 1.000)
Increase value
Decrease value
Shift place to set
→
After 1sec.
Shift place to set
*The decimal point set with this mode is applied to count value and preset value.
↓
<SET>
Monitor
ITEM
△
SHIFT
▽
