Panasonic AKW1110, Руководство пользователя

Страница: 24 / 60

KW1M Eco
－
POWER METER
16
Current for time measurement
Setting mode
Cutoff current setting mode
Enter ratio of current for time
measurement using
<ITEM/
△
>
<SHIFT/
▽
>
.
If you measure the current over
50.0%F.S., set to
“50.0”.
Enter cutoff current ratio using
<ITEM/
△
> <SHIFT/
▽
>
.
If you don’t measure the current under
10.0%F.S, set to
“10.0”.
(1.0
～
100.0)
→
<SET>
(1.0
～
50.0)
→
<SET>
Unit for pulse output setting mode
Press
<ITEM/
△
><SHIFT/
▽
>
to change unit for pulse output.
Unit is selected from 0.001
⇔
0.01
⇔
0.1
⇔
1
⇔
10
⇔
100
⇔
AL-P (Power alarm)
⇔
AL-C(Current alarm) ⇔ AL-S (Stand-by alarm) ⇔ Cnt (Count output).
0.001 0.01 0.1 1 10
100 AL-P AL-C
AL-S( ＊ ) Cnt( ＊ )
＊
only AKW1111
→
<SET>
Power alarm setting mode
Enter power for alarm using
<ITEM/
△
><SHIFT/
▽
>
.
(0.00
～
9999.99)
*It is only when “AL-P” is selected on unit for pulse output setting
mode.
→
<SET>
Current alarm setting mode
Enter current ratio (for the rated current) for alarm using
<ITEM/
△
><SHIFT/
▽
>
.
(1.0 ～ 100.0)
*It is only when “AL-C” is selected on unit for pulse output setting
mode.
→
<SET>
Stand-by alarm setting mode 1
＊
only AKW1111
Enter a ratio (for the rated current) of current used for threshold value to judge stand-by power
using
<ITEM/
△
><SHIFT/
▽
>
.
(1.0 ～ 100.0)
*It is only when “AL-S” is selected on unit for
pulse output setting mode.
→
<SET>
Stand-by alarm setting mode 2
＊
only AKW1111
Enter a time used for threshold value to judge stand-by power using
<ITEM/
△
><SHIFT/
▽
>
.
( 0
～
9999 min.)
*It is only when “AL-S” is selected on unit for pulse output setting
mode.
“0”: Alarm is always output at the time when judging the
stand-by power.
“1 to 9999”: Alarm is output at the time when passing the
setting time with the stand-by power.
The alarm can be reset by pressing <SET>
with the instantaneous electric power display
.
After reset the alarm, start to monitor the stand-by power again.
→
<SET>